UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5082
                        
                            Issued:1968-06-21
                    
                            Revised:2012-07-24
                    
                            Style
                            5082
                        
                            Single Conductor with other than Extruded Insulation.
                    
			Rating90 deg C, Voltage not specified, Horizontal flame, Oil Resistant 60 deg C (optional).
		
			Conductor32 AWG - 20 AWG solid or stranded round.
		
			InsulationExtruded PTFE, TFE 6 mils min average, 5 mils minimum at any point under PET, PETP tape with POLYESTER or PVC adhesive 10 mils min average, 8 mils minimum at any point (total 16 mils min average, 14 mils minimum at any point).
		
			AssemblyExtruded PTFE, TFE under laminated oriented PET, PETP with PVC or Polyester adhesive in the form of a spiral wrap bonded together.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5082	Issued:1968-06-21
			Revised:2012-07-24


Rating	90 deg C, Voltage not specified, Horizontal flame, Oil Resistant 60 deg C (optional).

Conductor	32 AWG - 20 AWG solid or stranded round.

Insulation	Extruded PTFE, TFE 6 mils min average, 5 mils minimum at any point under PET, PETP tape with POLYESTER or PVC adhesive 10 mils min average, 8 mils minimum at any point (total 16 mils min average, 14 mils minimum at any point).

Assembly	Extruded PTFE, TFE under laminated oriented PET, PETP with PVC or Polyester adhesive in the form of a spiral wrap bonded together.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.