UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5092
                        
                            Issued:1970-02-17
                    
                            Revised:2012-07-07
                    
                            Style
                            5092
                        
                            Single conductor with other-than-extruded insulation.
                    
			Rating250 deg C, 125 Vac, Horizontal flame.
		
			ConductorSolid copper alloy conductor, dia. 7 mils min. average, and 6.5 mils min. at any point. The conductor is wound spirally at a rate of 44 to 50 turns per inch around a fiber glass core for approx. 6 inches. The number of turns per inch is then decreased to between 6 and 2 for a distance of approx. 3-1/2 inches. The conductor is then wound back over the last 3-1/2 inches at a rate of between 6 and 2 turns per inch. The direction of winding is again reversed, and the conductor is wound at a rate of between 6 and 2 turns per inch for approx. 3/4 inches. The number of turns per inch is then increased to 44 to 50 turns per inch. The pattern repeats itself throughout the length of the wire.
		
			InsulationNon extruded - Inner - Two wraps of fiber glass wound in opposite directions.
Non-extruded - Outer - A fiber glass braid; 32 to 38 picks per inch and 16 carriers.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5092	Issued:1970-02-17
			Revised:2012-07-07


Rating	250 deg C, 125 Vac, Horizontal flame.

Conductor	Solid copper alloy conductor, dia. 7 mils min. average, and 6.5 mils min. at any point. The conductor is wound spirally at a rate of 44 to 50 turns per inch around a fiber glass core for approx. 6 inches. The number of turns per inch is then decreased to between 6 and 2 for a distance of approx. 3-1/2 inches. The conductor is then wound back over the last 3-1/2 inches at a rate of between 6 and 2 turns per inch. The direction of winding is again reversed, and the conductor is wound at a rate of between 6 and 2 turns per inch for approx. 3/4 inches. The number of turns per inch is then increased to 44 to 50 turns per inch. The pattern repeats itself throughout the length of the wire.

Insulation	Non extruded - Inner - Two wraps of fiber glass wound in opposite directions. Non-extruded - Outer - A fiber glass braid; 32 to 38 picks per inch and 16 carriers.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.