UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5097
                        
                            Issued:1970-12-03
                    
                            Revised:2012-05-15
                    
                            Style
                            5097
                        
                            Single Conductor with Non-extruded Insulation.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor1.25 sq. mm - 0.500 sq. mm, stranded bare copper.
		
			Insulation1 st layer - PET treads.  2nd layer - PET tape, 0.02 mm minimum thickness, 9.0 mm mimimum width.  3rd layer - PET braid.
		
			AssemblyServing of oriented PET threads held in place with oriented PET tape wound spirally over the threads, having a minimum overlap of 50%.  And then covered with an outer braid of PET consisting of 16 ends, each containing three threads.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5097	Issued:1970-12-03
			Revised:2012-05-15


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	1.25 sq. mm - 0.500 sq. mm, stranded bare copper.

Insulation	1 st layer - PET treads. 2nd layer - PET tape, 0.02 mm minimum thickness, 9.0 mm mimimum width. 3rd layer - PET braid.

Assembly	Serving of oriented PET threads held in place with oriented PET tape wound spirally over the threads, having a minimum overlap of 50%. And then covered with an outer braid of PET consisting of 16 ends, each containing three threads.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.