UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5137
                        
                            Issued:1974-09-17
                    
                            Revised:2012-07-26
                    
                            Style
                            5137
                        
                            Single conductor with other than extruded insulation.
                    
			Rating105 deg C, 600 Vac.
		
			Conductor20 AWG - 4 AWG, consisting of 38-30 AWG strands, length of lay of conductors per requirements for Type ST Cord.
		
			InsulationConsists of an inner closely woven Polyester braid; one PTFE tape, approximately 2.0 mils thick; and one Polyester tape, approximately 0.5 mil thick; each tape is minimum 0.5 inch wide and is applied with a minimum 0.5 overlap. Over this assembly an outer closely woven Polyester braid is applied.
		
			AssemblyInsulated single conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLead wire within Hermetic Motors where the acceptability of the combination is to be determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5137	Issued:1974-09-17
			Revised:2012-07-26


Rating	105 deg C, 600 Vac.

Conductor	20 AWG - 4 AWG, consisting of 38-30 AWG strands, length of lay of conductors per requirements for Type ST Cord.

Insulation	Consists of an inner closely woven Polyester braid; one PTFE tape, approximately 2.0 mils thick; and one Polyester tape, approximately 0.5 mil thick; each tape is minimum 0.5 inch wide and is applied with a minimum 0.5 overlap. Over this assembly an outer closely woven Polyester braid is applied.

Assembly	Insulated single conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Lead wire within Hermetic Motors where the acceptability of the combination is to be determined by UL LLC.