UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5143
                        
                            Issued:1975-12-24
                    
                            Revised:2012-01-29
                    
                            Style
                            5143
                        
                            DMD Lead Wire For Hermetic Motors
                    
			Rating105 deg C, 600 Vac.
		
			ConductorNos. 20 - 4 AWG: Nos. 30-38 AWG stranding, length of lay per requirements for Type ST Cord.
		
			InsulationLaminated tape consisting of 1.5 mil PETP fiber and 0.5 mil PETP tape (alternate 1.0 mil PETP tape) with 50% minimum lap and provided with PETP fiber or Araimid braid.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLead wire within Hermetic Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5143	Issued:1975-12-24
			Revised:2012-01-29


Rating	105 deg C, 600 Vac.

Conductor	Nos. 20 - 4 AWG: Nos. 30-38 AWG stranding, length of lay per requirements for Type ST Cord.

Insulation	Laminated tape consisting of 1.5 mil PETP fiber and 0.5 mil PETP tape (alternate 1.0 mil PETP tape) with 50% minimum lap and provided with PETP fiber or Araimid braid.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Lead wire within Hermetic Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.