UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5166
                        
                            Issued:1978-01-17
                    
                            Revised:2012-08-17
                    
                            Style
                            5166
                        
                            Single conductor with other than extruded insulation.
                    
			Rating105 deg C, 600 Vac, Horizontal Flame.
		
			Conductor20 AWG - 4 AWG consisting of 38-30 AWG stranding, tinned or bare copper. Length of lay per requirements for Type ST Cord.
		
			InsulationConsists of an inner closely woven non-extruded Polyester braid with a Polyester tape, approximately 1.0 mil thick, minimum 0.5 inch wide applied with a minimum 50% overlap over inner braid. Over this assembly an outer closely woven non-extruded Polyester braid is applied.
		
			AssemblyInsulated single conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLead wire within Hermetic Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 5	Page 5166	Issued:1978-01-17
			Revised:2012-08-17


Rating	105 deg C, 600 Vac, Horizontal Flame.

Conductor	20 AWG - 4 AWG consisting of 38-30 AWG stranding, tinned or bare copper. Length of lay per requirements for Type ST Cord.

Insulation	Consists of an inner closely woven non-extruded Polyester braid with a Polyester tape, approximately 1.0 mil thick, minimum 0.5 inch wide applied with a minimum 50% overlap over inner braid. Over this assembly an outer closely woven non-extruded Polyester braid is applied.

Assembly	Insulated single conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Lead wire within Hermetic Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.