UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5170
                        
                            Issued:1978-12-19
                    
                            Revised:2012-07-22
                    
                            Style
                            5170
                        
                            Single conductor with other-than-extruded insulation
                    
			Rating125 deg C, 600 Vac.
		
			Conductor22 AWG - 4 AWG consisting of 38-30 AWG stranding, length of lay per requirements for Type ST Cord.
		
			InsulationNonextruded Polyethylene Terephthalate tape, minimum average 0.5 mil thick, applied with half lap between inner and outer closely woven polyethylene terephthalate fiber or polyester braids, alternate - outer braid may be Aramid fiber.
		
			AssemblyInsulated single conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLead wire within Hermetically Sealed Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5170	Issued:1978-12-19
			Revised:2012-07-22


Rating	125 deg C, 600 Vac.

Conductor	22 AWG - 4 AWG consisting of 38-30 AWG stranding, length of lay per requirements for Type ST Cord.

Insulation	Nonextruded Polyethylene Terephthalate tape, minimum average 0.5 mil thick, applied with half lap between inner and outer closely woven polyethylene terephthalate fiber or polyester braids, alternate - outer braid may be Aramid fiber.

Assembly	Insulated single conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Lead wire within Hermetically Sealed Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.