UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5178
                        
                            Issued:1979-12-05
                    
                            Revised:2012-03-28
                    
                            Style
                            5178
                        
                            Single Conductor with Other-Than-Extruded Insulation
                    
			Rating105 deg C, 600 Vac.
		
			Conductor20 AWG - 4 AWG consisting of 38-30 AWG stranding; length of lay per requirements for Type ST Cord.
		
			InsulationPolyester Fiber Tape, 2 mils minimum average thickness, with PET tape, 0.5 mils minimum average thickness, and Aramid or PET fiber or Polyester braid.
		
			AssemblyAn inner layer of polyester fiber tape 2.0 mil thick, a polyethylene terephthalate (PET) tape, approximately 0.5 mil thick, applied with half lap and outer closely woven polyethylene terephthalate (PET) fiber or Polyester or Aramid braid.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLead wire within Hermetic Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5178	Issued:1979-12-05
			Revised:2012-03-28


Rating	105 deg C, 600 Vac.

Conductor	20 AWG - 4 AWG consisting of 38-30 AWG stranding; length of lay per requirements for Type ST Cord.

Insulation	Polyester Fiber Tape, 2 mils minimum average thickness, with PET tape, 0.5 mils minimum average thickness, and Aramid or PET fiber or Polyester braid.

Assembly	An inner layer of polyester fiber tape 2.0 mil thick, a polyethylene terephthalate (PET) tape, approximately 0.5 mil thick, applied with half lap and outer closely woven polyethylene terephthalate (PET) fiber or Polyester or Aramid braid.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Lead wire within Hermetic Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.