UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5210
                        
                            Issued:1983-02-25
                    
                            Revised:2012-01-11
                    
                            Style
                            5210
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Voltage not applicable to Fiber Optic, VW-1 flame.
		
			ConductorFiber Optic. 4 mils minimum diameter, 6 mils maximum diameter.
		
			BufferOptional - SR or PE coating.

			CoveringInner.  Optional - Nylon or PE.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyOne or more singles or groups of singles cabled together. The length of lay of twisted singles or groups of twisted singles is not specified. Fillers and/or barrier layer optional and their material is not specified. For composite optic core - One or more glass fiber core covered with silicone resin or polyurethane coating and/or nylon or polyethylene covering. Fillers optional.  Manufacturer shall intain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOuter.  Optional - PVC, 5 mils minimum thickness at any point.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inches80 mils64 mils
		
			1.501-2.500 inches110 mils88 mils
		
			2.501 inches and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Class 2 Circuits of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 5	Page 5210	Issued:1983-02-25
			Revised:2012-01-11


Rating	80 deg C, 30 Vac, Voltage not applicable to Fiber Optic, VW-1 flame.

Conductor	Fiber Optic. 4 mils minimum diameter, 6 mils maximum diameter.

Buffer	Optional - SR or PE coating.

Covering	Inner. Optional - Nylon or PE.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	One or more singles or groups of singles cabled together. The length of lay of twisted singles or groups of twisted singles is not specified. Fillers and/or barrier layer optional and their material is not specified. For composite optic core - One or more glass fiber core covered with silicone resin or polyurethane coating and/or nylon or polyethylene covering. Fillers optional. Manufacturer shall intain a complete description of each assembly.

Shield	Optional.

Covering	Outer. Optional - PVC, 5 mils minimum thickness at any point.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inches	80 mils	64 mils
	1.501-2.500 inches	110 mils	88 mils
	2.501 inches and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Class 2 Circuits of Electronic Equipment.