UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5355
                        
                            Issued:1999-04-08
                    
                            Revised:2012-03-19
                    
                            Style
                            5355
                        
                            Bonded Non-Extruded Flat Ribbon Cable
                    
			Rating80 deg C, 60 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG flat or round, material not specified.
		
			InsulationPET, PETP film, 0.4 mils minimum average thickness. PETP (polyester) film bonded each side with 0.5 mils thick polyester adhesive, 10 mils minimum edge width and 3 mils minimum distance between conductors.
		
			AssemblyOne to 150 conductors laid straight or irregular, parallel in one plane.
		
			Drain WireOptional.
		
			ShieldOptional. Metal faced polymeric tape.
		
			CoveringOptional.  Material not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 5	Page 5355	Issued:1999-04-08
			Revised:2012-03-19


Rating	80 deg C, 60 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG flat or round, material not specified.

Insulation	PET, PETP film, 0.4 mils minimum average thickness. PETP (polyester) film bonded each side with 0.5 mils thick polyester adhesive, 10 mils minimum edge width and 3 mils minimum distance between conductors.

Assembly	One to 150 conductors laid straight or irregular, parallel in one plane.

Drain Wire	Optional.

Shield	Optional. Metal faced polymeric tape.

Covering	Optional. Material not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.