UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5365
                        
                            Issued:1999-09-16
                    
                            Revised:2012-04-26
                    
                            Style
                            5365
                        
                            Laminated flat ribbon cable.
                    
			Rating80 deg C, 60 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG flat or round, solid or stranded.
		
			InsulationPOLYIMIDE or PPS, 0.4 mils minimum. (1) polyphenylene sulfide (PPS) film bonded each side with 0.5 mil polyester adhesive. (2) polyimide film bonded on each side with 0.4 mils polyester adhesive. Total combined thickness shall be 0.8 mils minimum. 10 mils minimum edge width and 3 mils minimum between conductors.
		
			AssemblyOne to 150 conductors laid straight or irregular parallel in one plane.
		
			ShieldOptional - Optional metal faced polymeric tape.
		
			CoveringOptional.
		
			Misc.Optional - Drain wire.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5365	Issued:1999-09-16
			Revised:2012-04-26


Rating	80 deg C, 60 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG flat or round, solid or stranded.

Insulation	POLYIMIDE or PPS, 0.4 mils minimum. (1) polyphenylene sulfide (PPS) film bonded each side with 0.5 mil polyester adhesive. (2) polyimide film bonded on each side with 0.4 mils polyester adhesive. Total combined thickness shall be 0.8 mils minimum. 10 mils minimum edge width and 3 mils minimum between conductors.

Assembly	One to 150 conductors laid straight or irregular parallel in one plane.

Shield	Optional - Optional metal faced polymeric tape.

Covering	Optional.

Misc.	Optional - Drain wire.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.