UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5409
                        
                            Issued:2003-10-31
                    
                            Revised:2012-04-24
                    
                            Style
                            5409
                        
                            Fiber Optic Flat Cable.
                    
			Rating60 deg C, voltage rating not applicable, VW-1 flame.
		
			Fiber OpticGlass fiber coated with urethane acrylate, 11 mils maximum diameter.
		
			Misc.Reinforcement Filler - Optional, material not specified.
		
			Subunit JacketExtruded FRPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			Strength MembersSolid steel wire, approx. 26 AWG, two employed.
		
			AssemblyOne or two sub-units laid parallel, solid steel strength wires embedded in outer jacket in one plane with sub-units. Each sub-unit consists of one optic core, reinforcement filler and sub-unit jacket.
		
			JacketExtruded FRPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.  Steel wires or any other metal or electrically conductive parts in the cable are not intended for current carrying or signal transmission purpose.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5409	Issued:2003-10-31
			Revised:2012-04-24


Rating	60 deg C, voltage rating not applicable, VW-1 flame.

Fiber Optic	Glass fiber coated with urethane acrylate, 11 mils maximum diameter.

Misc.	Reinforcement Filler - Optional, material not specified.

Subunit Jacket	Extruded FRPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Strength Members	Solid steel wire, approx. 26 AWG, two employed.

Assembly	One or two sub-units laid parallel, solid steel strength wires embedded in outer jacket in one plane with sub-units. Each sub-unit consists of one optic core, reinforcement filler and sub-unit jacket.

Jacket	Extruded FRPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment. Steel wires or any other metal or electrically conductive parts in the cable are not intended for current carrying or signal transmission purpose.