UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5410
                        
                            Issued:2003-12-18
                    
                            Revised:2012-11-12
                    
                            Style
                            5410
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating75 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles and/or twisted pairs, and optical fiber members cabled around the strength member. Strength member consists of the stranded galvanized steel with 12 mils minimum thickness PE covering. A barrier layer and/or fillers are optional.
		
			ShieldCopper braid, applied over the assembly.
		
			JacketExtruded PVC/TPU.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.275 inch or less40 mils32 mils
		
			0.276-0.425 inch50 mils40 mils
		
			0.426-0.700 inch60 mils48 mils
		
			Outer JacketOptional, same as Jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring. Centrally located steel strands wire is a strength member and not for current carrying purpose, it shall be connected to Ground at both ends.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5410	Issued:2003-12-18
			Revised:2012-11-12


Rating	75 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more singles and/or twisted pairs, and optical fiber members cabled around the strength member. Strength member consists of the stranded galvanized steel with 12 mils minimum thickness PE covering. A barrier layer and/or fillers are optional.

Shield	Copper braid, applied over the assembly.

Jacket	Extruded PVC/TPU.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.275 inch or less	40 mils	32 mils
	0.276-0.425 inch	50 mils	40 mils
	0.426-0.700 inch	60 mils	48 mils

Outer Jacket	Optional, same as Jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring. Centrally located steel strands wire is a strength member and not for current carrying purpose, it shall be connected to Ground at both ends.