UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5443
                        
                            Issued:2008-04-16
                    
                            Revised:2012-01-17
                    
                            Style
                            5443
                        
                            Laminated Flat Ribbon Cable
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			ConductorNo. 40-12 AWG, flat or round conductors.
		
			Insulation0.3 mil min PETP film with 0.9 mil min polyester adhesive and 0.3 mil min polyimide film (PI) with 0.5 mil min polyester adhesive on each side of conductors laminated together. 5 mils minimum edge width and 3 mils minimum between conductors.
		
			Assembly2-150, Straight or irregular parallel in one plane.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5443	Issued:2008-04-16
			Revised:2012-01-17


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	No. 40-12 AWG, flat or round conductors.

Insulation	0.3 mil min PETP film with 0.9 mil min polyester adhesive and 0.3 mil min polyimide film (PI) with 0.5 mil min polyester adhesive on each side of conductors laminated together. 5 mils minimum edge width and 3 mils minimum between conductors.

Assembly	2-150, Straight or irregular parallel in one plane.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.