UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5444
                        
                            Issued:2008-04-21
                    
                            Revised:2012-05-02
                    
                            Style
                            5444
                        
                            Single conductor with other-than-extruded insulation and covering
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG - 16 AWG min. solid or stranded.
		
			InsulationInner: Foamed PTFE tape, overall thickness 2 mils minimum average, 1 mil minimum at any point, applied with minimum 20 percent overlap and heat-sealed. Outer: Polyester tape, overall thickness 0.2 mil minimum at any point, applied with minimum 20 percent overlap and heat-sealed with polyester adhesive.
		
			ShieldRequired.
		
			CoveringPolyester tape, overall thickness 1 mil minimum at any point, applied with minimum 25 percent overlap and heat sealed with polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5444	Issued:2008-04-21
			Revised:2012-05-02


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG - 16 AWG min. solid or stranded.

Insulation	Inner: Foamed PTFE tape, overall thickness 2 mils minimum average, 1 mil minimum at any point, applied with minimum 20 percent overlap and heat-sealed. Outer: Polyester tape, overall thickness 0.2 mil minimum at any point, applied with minimum 20 percent overlap and heat-sealed with polyester adhesive.

Shield	Required.

Covering	Polyester tape, overall thickness 1 mil minimum at any point, applied with minimum 25 percent overlap and heat sealed with polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.