UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5447
                        
                            Issued:2008-08-27
                    
                            Revised:2011-11-01
                    
                            Style
                            5447
                        
                            Laminated flat ribbon cable.
                    
			Rating80 deg C, 60 V ac, Horizontal flame.
		
			Conductor40 - 12 AWG, flat or round. Straight or irregular parallel in one plane.
		
			InsulationFlame retardant PET film, 1 mil minimum thickness on one side of conductors, with polyester adhesive, 0.4 mil minimum thickness; Foamed PET film, 2 mil minimum thickness on other of conductors, with polyester adhesive, 0.4 mil minimum thickness; 10 mils minimum edge width and 6 mils minimum between conductors.
		
			Assembly2 - 100 conductors. Flame retardant PET film with polyester adhesive one side and foamed PET film with polyester adhesive on other side of the conductors are laminated together. An aluminum/PET shield glued with conductive or non-conductive polymeric adhesive over the foamed PET film side.
		
			ShieldMetal clad PET film.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5447	Issued:2008-08-27
			Revised:2011-11-01


Rating	80 deg C, 60 V ac, Horizontal flame.

Conductor	40 - 12 AWG, flat or round. Straight or irregular parallel in one plane.

Insulation	Flame retardant PET film, 1 mil minimum thickness on one side of conductors, with polyester adhesive, 0.4 mil minimum thickness; Foamed PET film, 2 mil minimum thickness on other of conductors, with polyester adhesive, 0.4 mil minimum thickness; 10 mils minimum edge width and 6 mils minimum between conductors.

Assembly	2 - 100 conductors. Flame retardant PET film with polyester adhesive one side and foamed PET film with polyester adhesive on other side of the conductors are laminated together. An aluminum/PET shield glued with conductive or non-conductive polymeric adhesive over the foamed PET film side.

Shield	Metal clad PET film.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.