UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5451
                        
                            Issued:2009-01-05
                    
                            Revised:New
                    
                            Style
                            5451
                        
                            PETP/PI Film Laminated Flat Cable
                    
			Rating105 deg C, 90 Vac Horizontal flame.
		
			Conductor2-150, 40 - 12 AWG, flat or round conductors, material not specified, Straight or irregular parallel in one plane.
		
			InsulationOn each side of conductors, 1.2 mil minimum PETP film with 0.8 mil minimum polyester adhesive and 0.8 mil minimum polyimide film (PI) with 0.6 mil minimum polyester adhesive. Minimum 12 mils insulation width on outside edges of conductors and 5 mils minimum insulation width between adjacent conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	105 deg C, 90 Vac Horizontal flame.

Conductor	2-150, 40 - 12 AWG, flat or round conductors, material not specified, Straight or irregular parallel in one plane.

Insulation	On each side of conductors, 1.2 mil minimum PETP film with 0.8 mil minimum polyester adhesive and 0.8 mil minimum polyimide film (PI) with 0.6 mil minimum polyester adhesive. Minimum 12 mils insulation width on outside edges of conductors and 5 mils minimum insulation width between adjacent conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.