UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5458
                        
                            Issued:2010-06-01
                    
                            Revised:2014-07-07
                    
                            Style
                            5458
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, -40 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG - 16 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles, twisted together.  In addition a hollow FEP tube may be cabled with the insulated singles.  The singles or groups of singles may be laid parallel forming flat, oval, or round cable. Lay not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.

			Covering(Optional) A 2 mils or heavier PTFE Tape may be applied over the conductor assembly or groups of conductors.
		
			ShieldOptional
		
			JacketPUR - POLYURETHANE
		
			Dia of cable under jacketMin AverageMin at Any Point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5458	Issued:2010-06-01
			Revised:2014-07-07


Rating	80 deg C, -40 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG - 16 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more singles, twisted pairs or groups of twisted singles, twisted together. In addition a hollow FEP tube may be cabled with the insulated singles. The singles or groups of singles may be laid parallel forming flat, oval, or round cable. Lay not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	(Optional) A 2 mils or heavier PTFE Tape may be applied over the conductor assembly or groups of conductors.

Shield	Optional

Jacket	PUR - POLYURETHANE
	Dia of cable under jacket	Min Average	Min at Any Point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.