UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5494
                        
                            Issued:2012-04-10
                    
                            Revised:2021-08-19
                    
                            Style
                            5494
                        
                            Single conductor with non-extruded insulation
                    
			Rating250 deg C, 150 Vac, Horizontal Flame.
		
			Conductor44 AWG - 10 AWG, solid or stranded.
		
			SeparatorOptional - Non-Extruded Foamed PTFE or Non-Extruded PTFE, 2 mils minimum average thickness, 1.5 mils minimum at any point.
		
			InsulationTape wrapped Non-extruded Thermoplastic Fluoropolymer insulation, 2.0 mils minimum average thickness, 1.5 mils minimum thickness at any point. See Facing Page for compound designation.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring where not subject to mechanical abuse.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5494	Issued:2012-04-10
			Revised:2021-08-19


Rating	250 deg C, 150 Vac, Horizontal Flame.

Conductor	44 AWG - 10 AWG, solid or stranded.

Separator	Optional - Non-Extruded Foamed PTFE or Non-Extruded PTFE, 2 mils minimum average thickness, 1.5 mils minimum at any point.

Insulation	Tape wrapped Non-extruded Thermoplastic Fluoropolymer insulation, 2.0 mils minimum average thickness, 1.5 mils minimum thickness at any point. See Facing Page for compound designation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring where not subject to mechanical abuse.