UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5509
                        
                            Issued:2012-04-12
                    
                            Revised:2013-09-17
                    
                            Style
                            5509
                        
                            Single conductor with non-extruded insulation
                    
			Rating200 deg C, 600 Vac, Horizontal Flame.
		
			Conductor44 AWG - 10 AWG, solid or stranded.
		
			SeparatorOptional - Non-Extruded Foamed PTFE or Non-Extruded PTFE, 2 mils minimum average thickness, 1.5 mils minimum at any point.
		
			InsulationNon-extruded tape wrapped PTFE, 2 mils minimum average thickness, 1.5 mils minimum thickness at any point with extruded FEP, 10 mils minimum average thickness, 9 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring where not subject to mechanical abuse.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5509	Issued:2012-04-12
			Revised:2013-09-17


Rating	200 deg C, 600 Vac, Horizontal Flame.

Conductor	44 AWG - 10 AWG, solid or stranded.

Separator	Optional - Non-Extruded Foamed PTFE or Non-Extruded PTFE, 2 mils minimum average thickness, 1.5 mils minimum at any point.

Insulation	Non-extruded tape wrapped PTFE, 2 mils minimum average thickness, 1.5 mils minimum thickness at any point with extruded FEP, 10 mils minimum average thickness, 9 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring where not subject to mechanical abuse.