UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5525
                        
                            Issued:2012-09-12
                    
                            Revised:2012-09-13
                    
                            Style
                            5525
                        
                            Multiple-Conductor Flat Cable with Non-Extruded Non-Integral Jacket
                    
			Rating90 deg C, No Voltage Specified, Horizontal Flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyOne or more groups of conductors labeled or complying with manufacturer's AWM Procedure or labeled flat cable and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall jacket as described below and may be joined together by an interconnecting web(s). The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional. May be provided over the assemblies or covering.
		
			CoveringOptional. Expanded PTFE Tape, 2 mils minimum at any point, may be provided over grouping of conductors between shield and jacket and laid parallel.
		
			JacketNon-Extruded TPU Tape Laminated to PTFE Tape.
		
			Materialmils minimum averagemils minimum at any point
		
			TPU1210
		
			PTFE21
		
			See facing page for compound designation.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5525	Issued:2012-09-12
			Revised:2012-09-13


Rating	90 deg C, No Voltage Specified, Horizontal Flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	One or more groups of conductors labeled or complying with manufacturer's AWM Procedure or labeled flat cable and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall jacket as described below and may be joined together by an interconnecting web(s). The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional. May be provided over the assemblies or covering.

Covering	Optional. Expanded PTFE Tape, 2 mils minimum at any point, may be provided over grouping of conductors between shield and jacket and laid parallel.

Jacket	Non-Extruded TPU Tape Laminated to PTFE Tape.
	Material	mils minimum average	mils minimum at any point
	TPU	12	10
	PTFE	2	1
	See facing page for compound designation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.