UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5549
                        
                            Issued:2015-01-13
                    
                            Revised:2015-01-28
                    
                            Style
                            5549
                        
                            Single conductor with other-than-extruded insulation
                    
			Rating125 deg C, 600 Vac.
		
			Conductor20 AWG - 10 AWG, consisting of 29-23 AWG stranding.
		
			InsulationNonextruded Polyethylene Terephthalate tape, minimum average 0.5 mil thick, applied with half lap between inner and outer closely woven polyethylene terephthalate fiber or polyester braids, alternate - outer braid may be Aramid fiber.
		
			AssemblyInsulated single conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseLead wire within Hermetically Sealed Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5549	Issued:2015-01-13
			Revised:2015-01-28


Rating	125 deg C, 600 Vac.

Conductor	20 AWG - 10 AWG, consisting of 29-23 AWG stranding.

Insulation	Nonextruded Polyethylene Terephthalate tape, minimum average 0.5 mil thick, applied with half lap between inner and outer closely woven polyethylene terephthalate fiber or polyester braids, alternate - outer braid may be Aramid fiber.

Assembly	Insulated single conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Lead wire within Hermetically Sealed Motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.