UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5554
                        
                            Issued:2015-07-27
                    
                            Revised:New
                    
                            Style
                            5554
                        
                            Laminated flat ribbon cable with overlap shield.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor32 AWG - 10 AWG, flat, straight or irregular parallel in one plane.
		
			InsulationPET film, 1.2 mils minimum thickness bonded on each side of conductors with polyester adhesive, 1.2 mils minimum thickness. 16 mils minimum edge width and 16 mils minimum distance between conductors.
		
			Assembly2 - 150 conductors, laid parallel.
		
			ShieldMetal faced polyester tape with polyester adhesive, total 0.5 mils minimum thickness, wrapped over insulated laminated cable longitudinally with 84 mils minimum overlap distance.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG - 10 AWG, flat, straight or irregular parallel in one plane.

Insulation	PET film, 1.2 mils minimum thickness bonded on each side of conductors with polyester adhesive, 1.2 mils minimum thickness. 16 mils minimum edge width and 16 mils minimum distance between conductors.

Assembly	2 - 150 conductors, laid parallel.

Shield	Metal faced polyester tape with polyester adhesive, total 0.5 mils minimum thickness, wrapped over insulated laminated cable longitudinally with 84 mils minimum overlap distance.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.