UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5564
                        
                            Issued:2016-12-16
                    
                            Revised:2016-12-25
                    
                            Style
                            5564
                        
                            Laminated Non-Extruded Flat Ribbon Cable
                    
			Rating105 deg C, 90 Vac, Horizontal flame.
		
			Conductor50 AWG - 12 AWG, flat or round, Straight or irregular parallel in one plane.
		
			InsulationPETP film, 0.8 mils minimum thickness, with 0.8 mils minimum flame retardant polyolefin (FRPO) adhesive on each side of conductors laminated together. 12 mils minimum edge width and 8 mils minimum distance between conductors. See Facing Page.
		
			Assembly2 to 150 conductors, laid parallel, laminated.
		
			ShieldMetal faced polyester tape with polyester adhesive, total 0.5 mils minimum thickness, laminated on one or both sides of PET film insulation entirely.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5564	Issued:2016-12-16
			Revised:2016-12-25


Rating	105 deg C, 90 Vac, Horizontal flame.

Conductor	50 AWG - 12 AWG, flat or round, Straight or irregular parallel in one plane.

Insulation	PETP film, 0.8 mils minimum thickness, with 0.8 mils minimum flame retardant polyolefin (FRPO) adhesive on each side of conductors laminated together. 12 mils minimum edge width and 8 mils minimum distance between conductors. See Facing Page.

Assembly	2 to 150 conductors, laid parallel, laminated.

Shield	Metal faced polyester tape with polyester adhesive, total 0.5 mils minimum thickness, laminated on one or both sides of PET film insulation entirely.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.