UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5571
                        
                            Issued:2017-10-05
                    
                            Revised:New
                    
                            Style
                            5571
                        
                            Single conductor cable with non-extruded insulation and non-extrued covering
                    
			Rating200 deg C, 1000 Vac, Horizontal flame.
		
			Conductor22 AWG - 4/0 AWG, stranded.
		
			InsulationNon extruded insulation consisting of 3 non-extruded layers.  Inner layer is Polyimide tape with minimum average thickness 1 mil; middle layer is Mica tape with minimum average thickness 8 mils and outer layer is Polyimide tape with minimum average thickness 1.2 mils.
		
			AssemblySingle conductor with multi-layered insulation and 2 overall fiberglass braids.
		
			CoveringTwo non-extruded fiberglass braids with varnish shall be provided over the insulation.  Each braid shall have a minimum thickness of 12 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	200 deg C, 1000 Vac, Horizontal flame.

Conductor	22 AWG - 4/0 AWG, stranded.

Insulation	Non extruded insulation consisting of 3 non-extruded layers. Inner layer is Polyimide tape with minimum average thickness 1 mil; middle layer is Mica tape with minimum average thickness 8 mils and outer layer is Polyimide tape with minimum average thickness 1.2 mils.

Assembly	Single conductor with multi-layered insulation and 2 overall fiberglass braids.

Covering	Two non-extruded fiberglass braids with varnish shall be provided over the insulation. Each braid shall have a minimum thickness of 12 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.