UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5575
                        
                            Issued:2019-07-25
                    
                            Revised:2019-07-26
                    
                            Style
                            5575
                        
                            Laminated Non-Extruded Flat Ribbon Cable
                    
			Rating80 deg C, 90 Vac, Horizontal flame.
		
			Conductor50 AWG - 12 AWG, flat or round, Straight or irregular parallel in one plane.
		
			InsulationAny material in table 7.1 of UL758 rated 80 deg C, See facing page for details.  Film(including adhesive), 5 mils minimum thickness on each side of conductors laminated together. 4 mils minimum edge width and 4 mils minimum distance between conductors.
		
			Assembly2 to 150 conductors, laid parallel, laminated.
		
			ShieldMetal clad Polyester Tape 0.6 mils minimum thickness, with minimum 0.16 inch overwrapped portion.
		
			CoveringPET film, 0.3 mils minimum thickness, with 0.9 mils minimum flame retardant polyoester adhesive on each side of shield laminated together with minimum 0.0100 inch overwrapped portion of each side of end.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 5	Page 5575	Issued:2019-07-25
			Revised:2019-07-26


Rating	80 deg C, 90 Vac, Horizontal flame.

Conductor	50 AWG - 12 AWG, flat or round, Straight or irregular parallel in one plane.

Insulation	Any material in table 7.1 of UL758 rated 80 deg C, See facing page for details. Film(including adhesive), 5 mils minimum thickness on each side of conductors laminated together. 4 mils minimum edge width and 4 mils minimum distance between conductors.

Assembly	2 to 150 conductors, laid parallel, laminated.

Shield	Metal clad Polyester Tape 0.6 mils minimum thickness, with minimum 0.16 inch overwrapped portion.

Covering	PET film, 0.3 mils minimum thickness, with 0.9 mils minimum flame retardant polyoester adhesive on each side of shield laminated together with minimum 0.0100 inch overwrapped portion of each side of end.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.