UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5586
                        
                            Issued:2021-10-26
                    
                            Revised:New
                    
                            Style
                            5586
                        
                            Multi-Conductor Cable Using Non-Integral Jacket
                    
			Rating200 deg C, no voltage specified, Horizontal flame.
		
			Insulated ConductorLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together. Lay not specified. Barrier layer, shield, braid and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			SeparatorOptional, non-extruded Foamed PTFE or non-extruded PTFE.
		
			ShieldOptional, may be over one or more of the insulated conductors or applied over the assembly.
		
			JacketTape wrapped Non-extruded Thermoplastic Fluoropolymer, minimum average thickness 4 mils, minimum thickness at any point 3 mils. See Facing Page for compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	200 deg C, no voltage specified, Horizontal flame.

Insulated Conductor	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two or more singles or groups of twisted singles twisted together. Lay not specified. Barrier layer, shield, braid and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Separator	Optional, non-extruded Foamed PTFE or non-extruded PTFE.

Shield	Optional, may be over one or more of the insulated conductors or applied over the assembly.

Jacket	Tape wrapped Non-extruded Thermoplastic Fluoropolymer, minimum average thickness 4 mils, minimum thickness at any point 3 mils. See Facing Page for compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.