UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5587
                        
                            Issued:2021-11-08
                    
                            Revised:2021-12-17
                    
                            Style
                            5587
                        
                            Multiple conductor with other-than-extruded Covering.
                    
			Rating200 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more insulated conductors, each with a fiberglass braid (inner covering), cabled together into a round cable.  There shall be an inner shield, binder tape(s) and (optional) fillers, an outer non-extruded fiberglass braid and an optional overall metal braid, as described below.
		
			Inner CoveringNon-extruded fiberglass braid with 6 mils minimum average thickness, 5 mils minimum thickness at any point, provided over each insulated conductor.
		
			Inner ShieldMetallic braid or tape provided over the cable core.
		
			BinderOne or more non extruded PTFE tapes provided over the inner shield.
		
			Outer CoveringNon-extruded fiberglass braid with 18 mils minimum average thickness and 17 mils minimum thickness at any point, provided over the
		
			Outer BraidOptional - Stainless steel braid
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment or Appliances for Equipment Interconnection
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5587	Issued:2021-11-08
			Revised:2021-12-17


Rating	200 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more insulated conductors, each with a fiberglass braid (inner covering), cabled together into a round cable. There shall be an inner shield, binder tape(s) and (optional) fillers, an outer non-extruded fiberglass braid and an optional overall metal braid, as described below.

Inner Covering	Non-extruded fiberglass braid with 6 mils minimum average thickness, 5 mils minimum thickness at any point, provided over each insulated conductor.

Inner Shield	Metallic braid or tape provided over the cable core.

Binder	One or more non extruded PTFE tapes provided over the inner shield.

Outer Covering	Non-extruded fiberglass braid with 18 mils minimum average thickness and 17 mils minimum thickness at any point, provided over the

Outer Braid	Optional - Stainless steel braid

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment or Appliances for Equipment Interconnection