Certificate of Compliance

CERTIFICATE OF COMPLIANCE

Certificate Number:

UL102516545-E45329

Report Reference:

E45329-2003-01-10

Issue Date:

December 21, 2024

Issued to:

SABIC INNOVATIVE PLASTICS B V

EUROPE - RESIN, PLASTICSLAAN 1, BERGEN OP ZOOM 4612 PX NL

This is to certify that representative samples of:

EXL9330(X)(f2)(GG)(B1)(IP), EXL9330B(X)(f2)(GG)(B1)(IP) (T N 18)/PC/Siloxane

covered under the category:

Plastics (QMFZ2)

have been investigated by UL in accordance with the following standard(s):

IEC 60695-11-20, Fire Hazard Testing-Part 11-20: Test Flames-500 W Flame Test Method
IEC 60695-11-10, Fire Hazard Testing-Part 11-10: Test Flames-50 W Horizontal and Vertical Flame Test Methods
IEC 60695-2-13 Fire Hazard Testing-Part 2-13: Glowing/Hot-Wire Based Test Methods-Glow-Wire Ignition Temperature (GWIT) Test Method for Materials
IEC 60695-2-12 Fire Hazard Testing-Part 2-12: Glowing/Hot-Wire Based Test Methods-Glow-Wire Flammability Index (GWFI) Test Method for Materials

(B1) -	Represents colour code BK1E526 and BK1E649
(GG) -	Denotes a global grade formulation previously in File E161759.
(IP) -	Inclined Plane Tracking per UL746A, average time to track at 1.5 kV is 60+ minutes.
(X) -	All colors except NC
(f2) -	Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
B1 -	Represents color code BK1E526, BK1E649 and BK1E519
NOTE -	Material designation may be followed by a color nomenclature consisting of either an alpha/numeric or a numeric/alpha combination.

For additional information please see the UL Product iQ™ and the Product Certification

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL Solutions.

Look for the UL Certification Mark on the Product


Deborah Jennings-Conner, VP Regulatory Services
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL Solutions (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations
© 2024 UL Solutions