|
Certificate Number:
|
UL549531-E45329 |
|
Report Reference:
|
E45329-1989-07-17 |
|
Issue Date:
|
November 22, 2024 |
|
|
|
Issued to:
|
SABIC INNOVATIVE PLASTICS B V |
|
|
EUROPE - RESIN, PLASTICSLAAN 1, BERGEN OP ZOOM 4612 PX NL |
|
|
|
This is to certify that representative samples of: |
CX7240 (GG)/Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) |
|
covered under the category: |
Plastics (QMFZ2) |
|
have been investigated by UL in accordance with the following standard(s): |
IEC 60695-11-20, Fire Hazard Testing-Part 11-20: Test Flames-500 W Flame Test Method
IEC 60695-11-10, Fire Hazard Testing-Part 11-10: Test Flames-50 W Horizontal and Vertical Flame Test Methods
IEC 60695-2-13 Fire Hazard Testing-Part 2-13: Glowing/Hot-Wire Based Test Methods-Glow-Wire Ignition Temperature (GWIT) Test Method for Materials
IEC 60695-2-12 Fire Hazard Testing-Part 2-12: Glowing/Hot-Wire Based Test Methods-Glow-Wire Flammability Index (GWFI) Test Method for Materials
IEC 60695-10-2 Fire Hazard Testing - Part 10-2: Abnormal Heat-Ball Pressure Test Method |
|
|
|
For additional information please see the UL Product iQ™ and the Product Certification |
|
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. |
|
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL Solutions. |
|
|
|
Look for the UL Certification Mark on the Product |