|
|
Electrical Insulation System Components |
E200050 |
|
| P LEO & CO LTD |
| UNIT 210, 2nd FLOOR, BUILDING 8W PHASE TWO, HONG KONG SCIENCE PARK, PAK SHEK KOK, NT HK |
| System Component |
System Designation |
System Class |
| 1C821, 1G130 (o), 1G155, 1G180, 1H818 (m), 1H850 Black (q), 1H850 Natural (o), 1H866 (g), 1H86A (o), 1K7170, 1K7177A, 1K7270, 1P700 (b), 1P701 (b), 1P702 (b), 1P703, 1P707 (b), 1P717 (b), 1P801, 1P802, 1P802 (k), 1PG887 (o), 1PK825, 1PN828 (o) |
B93 |
130(B) |
| Report Date: 1998-12-30 |
© 2024 UL LLC |
 |
| Lead Wires |
| lead wires are optional for this system |
| Temp | Insulation |
| 90°C | Neoprene + |
| 105°C | GTO-5, GTO-10, GTO-15(gas-tube-sign cable) + |
| 105°C | Perfluoro-alkyl vinyl ether/AI/PET/EVA + |
| 105°C | CPE - chlorosulfonated polyethylene + |
| 105°C | PVC - polyvinylchloride + |
| 125°C | XLPE - crosslinked polyethylene |
| 150°C | SR - silicone rubber(with or without braid) |
| 150°C | EPDM - ethylene propylene diene monomer |
| 150°C | XLPE - crosslinked polyethylene |
| 200°C | SR - silicone rubber(with or without braid) |
| 200°C | ETFE - ethylene tetrafluoroethylene |
| 200°C | Perfluoro-alkyl vinyl ether/AI/PET/EVA |
| + To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table. |
| Minor Sheet Materials |
| (layer, outer, wrap etc.) minor sheet is optional for this system |
| Designation | comments |
| 3M/U.S. Samica |
| 11903 | |
| 11959 | |
| 12042 | |
| 12043 | |
| 12102 | |
| 12104 | |
| 4314 | |
| 4316 | |
| 4351-10 | |
| 4351-5 | |
| 4351-7 | |
| 4373 | |
| 4374 | |
| 4378 | |
| 4379 | |
| 4800 | |
| 480210 | |
| 48027 | |
| 64100 | |
| 64206 | |
| 64213 | |
| 64217 | |
| 64300 | |
| 64303 | |
| Cotrell Paper Co Inc. |
| Copaco 125 | |
| COTTRELL PAPER CO INC [E41590] - employing Recognized materials |
| Copaco | |
| Copaco Kraft | |
| E. I. Dupont de Nemours & Co. |
| Kapton | |
| Kapton CR | |
| Mylar | |
| Nomex® N196 | |
| ESI/Fabrico |
| T-411 | |
| T-411 with copper | |
| Fibermark |
| 65C rise paper | |
| Kraft Paper | |
| Kraft-Electrical Grade | |
| Kraft-Plain Grade | |
| Fibertek Inc |
| DMD | |
| NKN | |
| Flexcon Industrial LLC (Alamotape) |
| Astromat NMN | |
| Astrotherm 180 XMX | |
| Astrotherm 200 XHX | |
| Epoxy "B" stage coated Nomex 5 | |
| Estermat DMD 100 | |
| HS coated film | |
| Kraft/Mylar/Kraft | |
| Rag paper/Mylar | |
| Lydall Manning |
| Manniglas 1200 | |
| Midwest Mica Co. |
| Mica | |
| National Vulcanized Fiber |
| CE-578 | |
| EG-873 | |
| Forbon | |
| G-11-860 (861) | |
| Lamicor GP 200HT | |
| Lamicor GP 9105 | |
| Lamicor GP 9206 | |
| Lamicor GP 9306 | |
| LE-675 | |
| Peerless Forbon | |
| Peerless rag | 100% cotton rag paper |
| XX-324 | |
| Oliner Corp. |
| Fishpaper | |
| Vulcanized Fibre | |
| Various Manufacturers |
| Kraft Paper | |
| Von Roll USA, Inc. |
| 5J47 | |
| 5J51 | |
| 5JF44 | varnish glass cloth |
| 5M28 | |
| 77520 | |
| 77923 | |
| 77956 | |
| 8929 | |
| Acuflex DMD | |
| Acuflex NKN | |
| ALM-X | |
| DMD 100 | |
| FCM | |
| KM | |
| KMK | |
| Kraft Paper | |
| Mica Glass | |
| NK | |
| NKN | |
| NM | |
| NMN | |
| Pyroglas 2018 | |
| Pyrolam 100 | |
| Pyrolam 70 | |
| Pyromid 180 | |
| RM | |
| RMR | |
| Therm-AL H | |
| any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material |
| Tapes |
| tapes are optional for this system |
| Designation | comments |
| P LEO & CO LTD [E126174] - Listed or Recognized Component |
| 1C821 | |
| 1G130 (o) | |
| 1G155 | |
| 1G180 | |
| 1H818 (m) | |
| 1H850 Black (q) | |
| 1H850 Natural (o) | |
| 1H866 (g) | |
| 1H86A (o) | |
| 1K7170 | |
| 1K7177A | |
| 1K7270 | |
| 1P700 (b) | |
| 1P701 (b) | |
| 1P702 (b) | |
| 1P703 | |
| 1P707 (b) | |
| 1P717 (b) | |
| 1P801 | |
| 1P802 | |
| 1P802 (k) | |
| 1PG887 (o) | |
| 1PK825 | |
| 1PN820 (o) | |
| 1PN828 (o) | |
| Core tubes and Bobbins |
| (for mechanical support only) cores are optional for this system |
| Designation | comments |
| CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials |
| Rynite 415HP | |
| Rynite 530 (f1) (+), 530L (f1) (+) | |
| Rynite 935 (f1) | |
| Rynite FR515(f1) | |
| Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1) | |
| Rynite FR543 *** materials are no longer Recognized *** | |
| Rynite FR945 | |
| Zytel 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1), E101(r9)(f1), E101L(r9)(f1) | |
| Zytel 103FHS(+), 103HSL(+), RN5077E(+), E103HSL(+) | |
| Zytel 70G13HS1L | |
| Zytel 70G13L | |
| Zytel 70G30HSL, 70G30HSLR | |
| Zytel 70G33HS1L(+) | |
| Zytel 70G33L(+) | |
| Zytel FR50(+)(f1) | |
| Chevron Phillips Chemical Co. LP |
| Ryton R-7 | |
| D&B Products |
| EL Mylar | |
| HS Mylar | |
| Kapton H 200C | |
| Nomex 200C | |
| Nomex/Mylar 150C | |
| E. I. Dupont de Nemours & Co. |
| RF9057 | |
| Zytel 70G30HS1L | |
| Paramount Tube |
| Kraft | |
| ParaQuin | |
| ParaQuin with Nomex | |
| Paratherm | |
| Rigid ParaQuin ENV | |
| Rigid Paratherm | |
| Rigid Paratherm ENV | |
| Precision Paper Tube Co. |
| Acetate | |
| Dielectric Kraft | |
| Heat-Shrink Mylar | |
| Kapton | |
| Mylar | |
| Polyester Glass | |
| Pyroform 310 | |
| Resinite FR9120 | |
| Thermoform 700 | |
| Thin Wall P-100 | |
| Vulcanized Fiber | |
| RTI |
| CeQuin I | |
| CeQuin V | |
| Fishpaper | |
| Fishpaper/Kraft | |
| Kraft Paper | |
| Phenolic/Kraft | |
| Sabic Innovative Plastics |
| Valox 325-1001 | |
| Valox 451E-1001 | |
| Valox 463 | |
| Valox 466-1001 | |
| Valox 751-1001 | |
| Valox 9215 M | |
| Valox 9230 M | |
| Valox 9515 M | |
| Valox 9530 M | |
| SABIC INNOVATIVE PLASTICS US L L C [E121562] - employing Recognized materials |
| Ultem 2300(BK3), 2300R(BK3), 2310(S*)(BK3), 2310R(BK3), 2310F(BK3), HU2310(BK3), 2300F(BK3), 2300FC(BK3), HU2300(BK3), PW2300(BK3) | |
| Valox 310SE0, 310SE0R | |
| Stone Industrial |
| AHS Mylar | |
| EL Mylar | |
| HS Mylar | |
| TORAY INDUSTRIES INC [E41797] - employing Recognized materials |
| Ryton R-4($$)(f1) *** materials are no longer Recognized *** | |
| Spacer and Wedges |
| spacer and wedges are optional for this system |
| Designation | comments |
| Cogiebi |
| Mica AM | |
| Mica AP | |
| Mica M | |
| Mica TM | |
| DuPont Specialty Products USA, LLC [E34739] - employing Recognized materials |
| Nomex® 410 | |
| Fibermark |
| 65C Rise Paper | |
| Franklin Fiber |
| Nomex Window Block | |
| Glastic Corp. |
| 1410 | |
| 1412 | |
| 1608 | |
| FHT | |
| MTS | |
| SG-200 | |
| TSF | polyester/glass |
| UTR | |
| Haysite Reiinforced Plastics |
| EHC | glass reinforced thermosetting polyester |
| ETR-FR-C | flame retardant glass reinforced polyester |
| H755 | NRMA GPO-1 155 |
| HST-II | glass reinforced thermosetting polyester |
| HST-II-P | |
| HTF | flexible, glass reinforced thermosetting polyester |
| Ultratec H950 | |
| Industrial Dielectric |
| 4400 T-125 | |
| 4400C T-125 | |
| 4800 R-125 | |
| Iten Fiber |
| ESP185 | |
| ESP220 | |
| G3TR20 | |
| GIG10 | |
| National Vulcanized Fiber |
| Fish Paper | |
| Nohl |
| APO-1 | |
| APO-3 | |
| APO-3PTI | |
| NTR-155 | |
| NTR-200 | |
| Resolite |
| FM | |
| FR | |
| Polyester Polyglas | |
| Supersil Polyglas | |
| Spaulding |
| Spauldite G-11-963 | |
| Spauldite T-536 | |
| Spaulrod | |
| Various Manufacturers |
| Wood, Untreated | |
| any material described in this table with no thickness requirement may be used as a spacer or a wedge |
| Tubing and Sleeving |
| tubing and sleeving are optional for this system |
| Designation | comments |
| 3M |
| 6B-150 | |
| 8A-150 | |
| Extendo PET FR | |
| RF | |
| RF-150 | |
| Suflex Acrylflex F | |
| Suflex Acrylflex VPI | |
| Suflex Flexicone 200 | |
| Suflex Flexicone VPI | |
| Suflex Silicone Resin A | |
| Suflex Silicone Resin C | |
| Suflex Silicone rubber | |
| Suflex Silverflex T&D | saturated and unsaturated |
| Suflex Vinylglas A | |
| ATKINS & PEARCE INC [E15253] - Recognized Component |
| Ben Har ST | |
| Ben Har ST 1250 | |
| Ex-Flex | |
| ATKINS & PEARCE INC [E63446] - Recognized Component |
| 1151-FR | |
| 1151-XL-FR1 | |
| Acryflex F | |
| Atkins & Pearce Inc. |
| 1062A | |
| 1062B | |
| 1062C | |
| 1258-1A | |
| Ben Har 1151-XL-200 A | |
| Ben Har 1151-XL-220 A | |
| Ben Har 1151-XL-240 A | |
| Ben Har Acryl A | polyacrylate resin coated fiber glass |
| Ben Har Acryl C | |
| Ben Har Acrylflex VPI | polyacrylate resin coated fiber glass |
| Ben Har Ex-Flex 1500 | |
| Ben Har Ultra Acryl A | |
| Ben Har Ultra Acryl B | |
| Ben Har Ultra Acryl C | |
| Suflex Vinylglas A | |
| Suflex Vinylglas B | |
| Suflex Vinylglas C | |
| D&B Products |
| Nomex | |
| Nomex/Polyester | |
| Delfingen US-New York Inc |
| Flexite LM-145 shrinkdown | |
| Flexite PO-135 shrinkdown | |
| Flexite Spiral Cut Nylon | |
| Flexite Teflon Standard | |
| Flexite TFE | |
| FP 920FR | |
| GP 243B | |
| Hygrade SR-A-1 | |
| NU-SLEEVE AG-155-C-1 | |
| NU-SLEEVE SG-200-C-1 | |
| NU-SLEEVE VG-130-C-1 | |
| PET Expandable | |
| DELFINGEN US-NEW YORK INC [E80713] - Recognized Component |
| NU-FLEX HT-1220 | |
| NU-FLEX HTS-520 | |
| DELFINGEN US-NEW YORK INC [E93101] - Recognized Component |
| NU Sleeve SG-200-A | |
| NU-Sleeve AG-155-A | |
| NU-Sleeve VG-130-A | |
| Hilec/Delfingen US-New York Inc |
| Heat Treated-Saturated (std) | 1/32 in. wall |
| Hilec 210 Series | |
| Hilec 310 Series | |
| Hilec 410 Series | |
| Hilec 540 Series | |
| Hilec 710 Series | |
| Hilec 727 N | |
| Turbo 117E A | |
| Turbo 117E B | |
| Turbo 117E C1 | |
| Turbo 117F A | |
| Turbo 117F B | |
| Turbo 117F C | |
| Turbo 117F C1 | |
| Turbocryl A | |
| Turbocryl B | |
| Turbocryl C1 | |
| Turbocryl C2 | |
| Turbocryl C3 | |
| Turbocryl F-C-2 Type 2 | |
| Turbotuf A | |
| Turbotuf B | |
| Insulation Sales |
| Heat Shrink Mylar end caps | |
| Natvar |
| Acryliglas 727 N | |
| Stone Industries |
| Kraft Paper | |
| Nomex | |
| Nomex/Kapton | |
| Nomex/Mylar | |
| Polyester | |
| Varflex |
| Silflex | |
| VARFLEX CORP [E53690] - Recognized Component |
| Varglas 231, Varglas Viton 231 | |
| Varglas Non-Fray H | |
| Varglas Non-Fray HM | |
| Varglas Non-Fray HO | |
| Varglas Non-Fray HP | |
| Varglas Silicone Rubber SR-9400 | |
| VARFLEX CORP [E63450] - Recognized Component |
| Varglas | |
| Varglas A-397 | |
| Varglas ES-4400 | |
| Varglas Silicone Resin 500 | |
| Tie Cords |
| tie cords are optional for this system |
| Designation | comments |
| American Efird Inc. |
| Cabled polyester cord | |
| LP 1008 | |
| LP 1012 | |
| LP 1126 | |
| LP 1552 | |
| LP 1556 | |
| M1491A | |
| Polyester cord | |
| Polyester cord bonded medium shrink | |
| Atkins & Pearce Inc. |
| 13-220 | |
| 17-200-NX | |
| 17-210 | |
| 29-220 | |
| A4C1B1-S | |
| A4C1B1-SR CON | |
| A4C1B1-T6 CON | |
| AP-3100-T | |
| HT | Nomex |
| MS 9023 HSUN-4 | |
| TG | TFE Coated |
| Breyden Products |
| BPCCT-155 | |
| BPCCT-180 | |
| Ranbar Electrical Materials |
| B-7-650 | |
| B-7-652 | |
| ERX-023 | |
| TR-312 | |
| TR-315 | |
| TR-319 | |
| TR-408 | |
| TSR-150 | |
| TSR-157 | |
| Varflex |
| 48 | silicone coated fiberglass |
| Western Filament |
| 50DOF17W | |
| 50NOF17W | |
| DHS Series | |
| DHS-1CL | |
| DRT Series | |
| Potting Compounds |
| potting compounds are optional for this system |
| Designation | comments |
| Ranbar Electrical Materials Inc. |
| B-7-650 | |
| B-7-652 | |
| ERX-023 | |
| TR-312 | |
| TR-315 | |
| TR-319 | |
| TR-408 | |
| TSR-150 | |
| TSR-157 | |
| Varnishes |
| Designation | comments |
| ELANTAS PDG, Inc. [E75225] - Recognized Component |
| 2003@&, R2003&, CORONA-Protect? 858A01&, R2003 VT RTC&, R2003 VTC&, R2003 VTC Thixo&, R2003AK VT& | May or may not be followed by a 1 or 2 digit alphanumeric suffix, possibly followed by a -66 suffix, possibly followed by a -B, -R, -S, or -T suffix, all indicating the types and amounts of solvents, fillers and/or colors. |
| 2070 VT@& | May or may not be followed by a 1 or 2 digit alphanumeric suffix, possibly followed by a -66 suffix, possibly followed by a -B, -R, -S, or -T suffix, all indicating the types and amounts of solvents, fillers and/or colors. |
| B-535-@, B-535-5S, B-535-NB-2 | May or may not be followed by a 1 or 2 digit alphanumeric suffix, possibly followed by a -66 suffix, possibly followed by a -B, -R, -S, or -T suffix, all indicating the types and amounts of solvents, fillers and/or colors. |