|
Electrical Insulation System Components |
E200050 |
|
P LEO & CO LTD |
UNIT 210, 2nd FLOOR, BUILDING 8W PHASE TWO, HONG KONG SCIENCE PARK, PAK SHEK KOK, NT HK |
System Component |
System Designation |
System Class |
1A025, 1G006, 1G130 (o), 1G155, 1G180, 1G200, 1H130, 1H818 (m), 1H850 Black (q), 1H850 Natural (o), 1H860 (f), 1H866 (g), 1H86A (o), 1H86R (g), 1K063, 1K063CR, 1K7170, 1K7171A, 1K7172, 1K7172, 1K7178, 1N008, 1N012, 1N155, 1P133 (f), 1P316 (a), 1P350 (e), 1P656 (d), 1P700 (b), 1P756 (h), 1P801, 1P802, 1P802 (k), 1P833 xx (@), 1PEN2, 1PEN3, 1PN2R, 1PN3R, 1PN820 (o), 1PN828 (o), 1TF05, 2R-SG, 2T-TFL, 2T-TFS, 2T-TFT |
F88 |
155(F) |
Report Date: 1999-06-30 |
© 2024 UL LLC |
![](Img/ur.png) |
Filament Wire |
Additional Ground & Interwinding insulation is required to separate this winding from other windings or between this winding and grounded/dead metal |
Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below |
Recognized Component Appliance Wiring Material (AVLV2) listed below |
Unless otherwise noted, winding wire types listed below may be used in combination within a single product |
| HOI LUEN ELECTRICAL MFR CO LTD [E257525] - Recognized Component |
| FIW(x)-B | | |
| FIW(x)-F | | |
| P LEO & CO LTD [E158033] - Recognized Component |
| FIW x %+ | | |
| FIW x H (#)(a)(&) | | |
| P LEO & CO LTD [E491285] - Recognized Component |
| FIW-X B[a] | | |
| FIW-X F[a] | | |
Filament Wire |
Additional Ground & Interwinding insulation is not required to separate this winding from other windings or between this winding and grounded/dead metal |
Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below |
Recognized Component Appliance Wiring Material (AVLV2) listed below |
Unless otherwise noted, winding wire types listed below may be used in combination within a single product |
| Furukawa |
| TEX-F | 4.72 (0.12) | |
| RUBADUE WIRE CO INC [E206198] - Recognized Component |
| D-(10 to 40)-X-XX-F-XX-M (M = or > 2.0) | 4.06 (0.1) | double layered Teflon FEP |
| S-(10 to 40)-X-XX-F-X-N (N = or > 3.0) | 4.06 (0.1) | 4.06 mils thick, Single Insulated |
| S-(18 to 40)-X-XX-F-X-M (M = or > 2.0) | 4.06 (0.1) | 4.06 mils thick, Single Insulated |
| T-(10 to 40)-X-XX-F-XXX-M (M = or > 2.0) | 4.06 (0.1) | 4.06 mils of FEP generic material |
| TCA3 (b) | 3.62 (0.09) | 3.62 mils of ETFE generic material |
| Rubadue Wire Co. Inc. |
| Tefzel wire | 3.62 (0.09) | |
| TOTOKU INC. [E166483] - Recognized Component |
| TIW-3X$+ | 3.86 (0.1) | Reinforced insulation of ETFE minimum |
| TIW-E(a)(#), 3S-ETFE (#) | 3.86 (0.1) | |
Enameled Wire |
Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below |
Ground Insulation is required to separate this winding from grounded/dead metal |
Interwinding Insulation is required to separate this winding from other enameled wire |
Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product |
| ANSI Type | Temp(°C) | Basecoat(Topcoat) |
| MW 79 | or 155°C | Polyurethane |
| MW 80 | or 155°C | Polyurethane (Polyamide) |
| MW 82 | or 180°C | Polyurethane |
| MW 83 | or 180°C | Polyurethane (Polyamide) |
| MW 85 | or 180°C | Polyurethane |
Ground and Interwinding Insulations |
any Recognized Component Plastic (QMFZ2), polyethylene terephthalate film (PET) 5 mils minimum |
| Designation | mils(mm) | comments |
| 3M Japan Limited [E59505] - Recognized Component |
| SUPER 10-T | 2[layers] | |
| SUPER 10-W | 2[layers] | |
| DuPont Specialty Products USA LLC [E39505] - Recognized Component |
| Kapton® 100CR, 100CRC | 1 (0.03) | |
| Kapton® 100H, 100HN, 100HN-S, 100H-ZT, 100HN-ZT, 100FPC-ZT, 100TAB-ZT, 100PST, 100HA, 100TN, 100V, 100VN, 100FPC, 100FPC-A, 100HPP-ST | 1 (0.03) | |
| DuPont Specialty Products USA, LLC [E34739] - Recognized Component |
| Nomex® 410 | 5[layers] | |
| Mylar Specialty Films [E93687] - Recognized Component |
| KALADEX Kaladex 1030 *** this product is no longer Recognized *** | 1 (0.03) | |
| P LEO & CO LTD [E126174] - Recognized Component |
| 1H860 (f) | 3[layers] | |
| 1H866 (g) | 1[layers] | |
| 1H86R (g) | 1[layers] | |
| 1K7170 | 1[layers] | |
| 1K7172 | 1[layers] | |
| 1K7177 *** this product is no longer Recognized *** | 1[layers] | |
| 1K7178 | 1[layers] | |
| 1N012 | 2[layers] | |
| 1P133 (f) | 3[layers] | |
| 1P135 (c) *** this product is no longer Recognized *** | 3[layers] | |
| 1P756 (h) | 5[layers] | |
| 1P801 | 5[layers] | |
| 1P802 | 5[layers] | |
| 1PEN2 | 1[layers] | |
| 1PEN3 | 1[layers] | |
| 1PN2R | 1[layers] | |
| 1PN3R | 1[layers] | |
| P. Leo |
| 1H130 | 3[layers] | |
| SUMITOMO BAKELITE CO LTD [E41429] - Recognized Component |
| SUMIKON AM-3200 *** this product is no longer Recognized *** | 11.8 (0.3) | |
| SUMIKON PM-9630 | 11.8 (0.3) | |
| SUMIKON PM-9720 | 11.8 (0.3) | |
| SUMIKON PM-9750 | 11.8 (0.3) | |
| SUMIKON PM-9820, PM-9825 | 11.8 (0.3) | |
| SUMIKON PM-9830 | 11.8 (0.3) | |
| SUMIKON PM-9850 | 11.8 (0.3) | |
| TOYOBO CO LTD [E51743] - Recognized Component |
| Teonex Film NQ510, Q5100, Q5300, Q8100, Q8300 | 1 (0.03) | |
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material |
Tapes |
tapes are optional for this system |
| Designation | comments |
| 3M Japan Limited [E59505] - Listed or Recognized Component |
| 2245 | (optional) |
| CU-35C | (optional) |
| SUPER 10-T | |
| SUPER 10-W | |
| P Leo & Co Ltd |
| 1A605 | |
| 1P130 | |
| 1P808 | |
| 1P830 | |
| 1P9FR | |
| 1PEN5 | |
| 1PN2R | |
| 1PN3R | |
| 1TF07 | |
| P LEO & CO LTD [E126174] - Listed or Recognized Component |
| 1A025 | |
| 1A570 *** this product is no longer Recognized *** | |
| 1C822 *** this product is no longer Recognized *** | |
| 1G006 | |
| 1G130 (o) | |
| 1G155 | |
| 1G180 | |
| 1G200 | |
| 1H818 (m) | |
| 1H850 Black (q) | |
| 1H850 Natural (o) | |
| 1H860 (f) | |
| 1H86A (o) | |
| 1H86R (g) | |
| 1K063 | |
| 1K063CR | |
| 1K7170 | |
| 1K7171A | |
| 1K7172 | |
| 1K7178 | |
| 1N008 | |
| 1N012 | |
| 1N155 | |
| 1P133 (f) | |
| 1P135 (c) *** this product is no longer Recognized *** | |
| 1P316 (a) | |
| 1P350 (e) | |
| 1P656 (d) | |
| 1P700 (b) | |
| 1P756 (h) | |
| 1P801 | |
| 1P802 | |
| 1P802 (k) | |
| 1P833 xx (@) | |
| 1PEN2 | |
| 1PEN3 | |
| 1PN820 (o) | |
| 1PN828 (o) | |
| 1TF05 | |
| TERAOKA SEISAKUSHO CO LTD [E56086] - Listed or Recognized Component |
| 831S | (optional) |
Core tubes and Bobbins |
(for mechanical support only) cores are optional for this system |
| Designation | comments |
| Cosmo Link |
| PTFE-L | |
| PTFE-T | |
| Furukawa Electric |
| PI-Tube | |
| Great Holding Industrial Co., Ltd. |
| TFL | |
| TFS | |
| TFT | |
| Hitachi Cable Ltd |
| Verafit V2 | |
| Kurabe Industrial |
| SE-1 | |
| SE-2 | |
| Nikkan |
| E-651U-1 | |
| E-651U-2 | |
| S-693-600 | |
| S-693F-1 | |
| Nissei Electric |
| RSU-1 | |
| RSU-2 | |
| P. Leo & Co. (B C) Ltd. |
| 2R-SG | |
| 2T-TFL | |
| 2T-TFS | |
| 2T-TFT | |
| Sumitomo Electical Fine Polymer |
| Sumitube F2 (Z) | |
| Zeus Industrial Products Inc. |
| TFE-LW-150 | |
| TFE-SW-600 | |
| TFE-TW-300 | |
Tie Cords |
tie cords are optional for this system |
| Designation | comments |
| Teijin |
| BHT-44T | |
Potting Compounds |
potting compounds are optional for this system |
| Designation | comments |
| GE Toshiba Silicone |
| TSE3331 | |
| TSE3331K | |
Varnishes |
varnishes are optional for this system |
| Designation | comments |
| ELANTAS PDG, Inc. [E75225] - Recognized Component |
| 434 Air Dry | Air Dry |
| 468-2 (d), 468-2FC (d), 468-2-7-xxF (d), 468-2-7FC-xxF (d) | May be followed by a two three alphanumeric suffix indicating percent of insert fill and/or color. |
| 711-F-2106 | |
| 87V-456, 77X-010, 77X-010F | |
| V1380, V1380FC, V1380FC Black, 80381FC | |
| V1630, V1630FS, V1630FS50, V1630FS Black, 80361, 80361FS | |
| Y-210, Y-210BLK, Y-210 BLACK, Y-210 Grey, Y-210PS Thermodur, EB 920 | |
| ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component |
| 434 Air Dry | |
| 468-2 (d), 468-2FC(d) | |
| 711-F-2106 | |
| 87V-456, 77X-010, 77X-010F | |
| V1380, V1380FC, V1380FC Black, 80381FC | |
| V1630FS, V1630, V1630FS50, V1630FS Black, 80361, 80361FS | |
| Y-210, Y-210BLK, Y-210 Grey, Y-210PS Thermodur, EB920 | |
| John C Dolph Co [E317427] - Recognized Component |
| AC-43, EB-43-HG, EB-43-FB, AC-43-66, EG-43/698-D, EG-43/759-D, ER-43/368-D, EB 43/387-D | |
| BC-346A, BC-346-A, BC-346B, BC-346-E, BB-348, BB-346-HF, BC-346HF, BG-346A, BB-346-A, BB-346/A, BC-370 | |
| KYOCERA Corporation [E83702] - Recognized Component |
| TVB2024 | |
| TVB2180T | |
| MEIDEN CHEMICAL CO LTD [E202574] - Recognized Component |
| 754 XL | Cannot be used with TEX-F |
| 880 | |
| Resonac Corporation [E72979] - Recognized Component |
| WA-238A | |
| WF-285 | |
| WP-2952, WP-2952F-5 | |
| WP-2952F-2G, WP-2952F-2G(Y), WP-2952F-2G(YL), WP-2952F-2G(FC), WP-2952F-2G(H), WP-2952F-2G(K) | |
Miscellaneous Minor Insulations |
miscellaneous minor insulations are optional for this system |
| Designation | comments |
| CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials |
| Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1) | Rynite, coil cover |
| Zytel 103FHS(+), 103HSL(+), RN5077E(+), E103HSL(+) | |
| Chang Chun |
| PBT-4130 | Coil cover |
| KOLON ENP INC [E190675] - employing Recognized materials |
| KP212V0(bbbb) | |
| Mitsubishi Chemical Corporation [E53664] - employing Recognized materials |
| NOVADURAN 5010N6(c) | coil cover |
| NOVAMID 3010N, 3010N(x) *** materials are no longer Recognized *** | coil cover |
| Teijin |
| CH7030 | coil coverCoil cover |
| CN7000 | coil coverCoil cover |
| CRN7000 | coil coverCoil cover |
| CRN7030 | coil coverCoil cover |
| TORAY INDUSTRIES INC [E41797] - employing Recognized materials |
| 1494 | coil cover |