|
|
Electrical Insulation System Components |
E200050 |
|
| P LEO & CO LTD |
| UNIT 210, 2nd FLOOR, BUILDING 8W PHASE TWO, HONG KONG SCIENCE PARK, PAK SHEK KOK, NT HK |
| System Component |
System Designation |
System Class |
| 1C821, 1G006, 1G015, 1G130 (o), 1G155, 1G180, 1H850 Black (q), 1H850 Natural (o), 1H86A (o), 1K063, 1K7170, 1K7270, 1M868, 1N012, 1N155, 1P700 (b), 1P701 (b), 1P702 (b), 1P703, 1P705, 1P707 (b), 1P717 (b), 1P751, 1P801, 1P802, 1PEN2, 1PEN3, 1PG888, 1PK825, 1PN2R, 1PN3R, 1PN820 (o), 1PN828 (o), 2T-TFL-xx.x (a), 2T-TFS-xx.x (a), 2T-TFT-xx.x (a) |
N85 |
200(N) |
| Report Date: 1999-06-03 |
© 2024 UL LLC |
 |
| Filament Wire |
| Additional Ground & Interwinding insulation is required to separate this winding from other windings or between this winding and grounded/dead metal |
| Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below |
| Recognized Component Appliance Wiring Material (AVLV2) listed below |
| Unless otherwise noted, winding wire types listed below may be used in combination within a single product |
| Yung Chang Silicone Co. |
| Silicone coated MW35 | | Secondary insulation - (to be isolated from direct contact with windings by any Ground or Phase insulation) |
| Enameled Wire |
| Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below |
| Ground Insulation is required to separate this winding from grounded/dead metal |
| Interwinding Insulation is required to separate this winding from other enameled wire |
| Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product |
| ANSI Type | Temp(°C) | Basecoat(Topcoat) |
| MW 35 | or 200°C | Polyester-amide-imide (Polyamide-imide) |
| MW 73 | or 200°C | Polyester-amide-imide (Polyamide-imide) |
| MW 74 | or 200°C | Polyester-amide-imide |
| Bare Conductor - insulated with any Nomex Ground insulation in this table 2mils (0.051mm) min., 50% overlap |
| Lead Wires |
| lead wires are optional for this system |
| Temp | Insulation |
| 150°C | EPDM - ethylene propylene diene monomer + |
| 150°C | XLPE - crosslinked polyethylene + |
| 200°C | SR - silicone rubber(with or without braid) |
| 200°C | PTFE - polytetrafluoroethylene |
| 200°C | PFA - Perfluoroalkoxy |
| 200°C | FEP - fluorinated ethylene propylene |
| 200°C | ETFE - ethylene tetrafluoroethylene |
| + To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table. |
| Minor Sheet Materials |
| (layer, outer, wrap etc.) minor sheet is optional for this system |
| Designation | comments |
| Dupont -Teijin Films |
| Mylar | |
| E. I. Dupont de Nemours & Co. |
| Kapton | |
| Flexcon Industrial LLC (Alamotape) |
| Astromat NMN | |
| Astrotherm 180 XMX | |
| Astrotherm 200 XHX | |
| CMC | |
| Estermat DMD 100 | |
| Estermat DMD 70 | |
| QM | |
| TMT | |
| Imperial Chemical Industries |
| Kaladex K2000 | |
| P. Leo |
| D/M### | ### = layer thickness in mils |
| DMD### | ### = layer thickness in mils |
| DPD### | ### = layer thickness in mils |
| MN-222 | |
| N/H/N### | ### = layer thickness in mils |
| N/M### | ### = layer thickness in mils |
| N/PEN/N-### | ### = layer thickness in mils |
| NMN-### | ### = layer thickness in mils |
| NTN-### | ### = layer thickness in mils |
| NTN-222 | |
| RM-63 | |
| RP65 | |
| SM61 | |
| SR315T | |
| SR853T | |
| TK-#### | # - represents thickness layer in mils |
| TK-5013 | |
| TP-#### | # - represents thickness layer in mils |
| TP-5008 | |
| TPT-##### | # - represents thickness layer in mils |
| any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material |
| Tapes |
| tapes are optional for this system |
| Designation | comments |
| 3M (Minnesota Mining & Mfg Co) |
| 11 | thermosetting rubber adhesive, black acetate cloth |
| 12 | |
| 1276 | |
| 16 | |
| 28 | thermosetting rubber adhesive, acetate cloth |
| 28L | |
| 90 | glass cloth |
| 3M COMPANY [E17385] - Listed or Recognized Component |
| 1 (a) | |
| 1205 | |
| 1298 (b) | |
| 1298CR | |
| 1312 (a) | |
| 1318 clear (a) | |
| 1318-1 (a) | |
| 1318-2 (a) | |
| 1339 | |
| 1350-1 (b) | |
| 1350-2 (c) | |
| 1350CR-1 | |
| 1350CR-2 | |
| 1350F-1 (b) | |
| 1350F-2 (c) | |
| 1554K | |
| 27 (a) | |
| 44 (a) | |
| 44-T (a) | |
| 44D (a) | |
| 46 | |
| 5 | |
| 54 (a) | |
| 55 | |
| 56 (a) | |
| 57 (a) | |
| 58 (a) | |
| 60 | |
| 61 | |
| 62 | |
| 63 | |
| 69 (a), 9 (a) | |
| 74 (a) | |
| 75 | |
| 79 | |
| 92 | |
| MR 94 | |
| MR 94B (c) | |
| Super 10 (a) | |
| Super 20 (a) | |
| P Leo & Co (B C) Ltd |
| 1M868 | |
| 1PG888 | |
| P LEO & CO LTD [E126174] - Listed or Recognized Component |
| 1C821 | |
| 1G006 | |
| 1G015 | |
| 1G130 (o) | |
| 1G155 | |
| 1G180 | |
| 1H850 Black (q) | |
| 1H850 Natural (o) | |
| 1H86A (o) | |
| 1K063 | |
| 1K7170 | |
| 1K7177 *** this product is no longer Recognized *** | |
| 1K7270 | |
| 1N012 | |
| 1N155 | |
| 1P700 (b) | |
| 1P701 (b) | |
| 1P702 (b) | |
| 1P703 | |
| 1P705 | |
| 1P707 (b) | |
| 1P717 (b) | |
| 1P751 | |
| 1P801 | |
| 1P802 | |
| 1P802 (k) *** this product is no longer Recognized *** | |
| 1PEN2 | |
| 1PEN3 | |
| 1PK825 | |
| 1PN2R | |
| 1PN3R | |
| 1PN820 (o) | |
| 1PN828 (o) | |
| Core tubes and Bobbins |
| (for mechanical support only) cores are optional for this system |
| Designation | comments |
| CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials |
| Rynite 530 (f1) (+), 530L (f1) (+) | |
| Rynite 935 (f1) | |
| Paramount Tube |
| Nomex | |
| ParaQuin | |
| ParaQuin F | |
| Rigid ParaQuin | |
| Rigid ParaQuin F | |
| Precision Paper Tube Co. |
| FR9000 | |
| Heat-Shrink Mylar | |
| Pyroform 310 | |
| Resinite 8108 | |
| Resinite 8111 | |
| Resinite 8717 | |
| Resinite 9120 | |
| Resinite 9120-1 | |
| Thermoform 1000 | Kapton film with amide-imide binder |
| Thermoform 255 | |
| Thermoform 700 | |
| Thin Wall P-100 | |
| Thin Wall P-30 | |
| Thin Wall P-60 | |
| Spacer and Wedges |
| spacer and wedges are optional for this system |
| Designation | comments |
| Glastic Corp. |
| FHT | |
| MTS | |
| SG-200 | |
| TSF | polyester/glass |
| UTS | |
| Industrial Dielectric |
| Insulstruc X2FR-PG | |
| Liberty Pultrusions |
| Supersil | |
| any material described in this table with no thickness requirement may be used as a spacer or a wedge |
| Tubing and Sleeving |
| tubing and sleeving are optional for this system |
| Designation | comments |
| ATKINS & PEARCE INC [E15253] - Recognized Component |
| Silverflex | |
| ATKINS & PEARCE INC [E63446] - Recognized Component |
| 1151-FR | |
| 1151-XL-200 | |
| 1151-XL-220 | |
| 1151-XL-240 | |
| 1151-XL-FR1 | |
| Acryflex F | |
| Flexicone 200 | |
| Atkins & Pearce Inc. |
| Ben Har TFE | |
| Suflex Silicone Rubber Resin | |
| Atlantic Tubing |
| TFL | |
| TFS | |
| TFT | |
| Delfingen US-New York Inc |
| Flexite Spiral Cut TFE | |
| Flexite TFE | |
| NU-SLEEVE AG-155 | |
| NU-SLEEVE SG-200 | |
| Polytube | |
| TFE-300 | |
| Hitachi |
| Heat Shrink Tube M2 | |
| Natvar |
| Acryliglas | |
| Natglas | |
| Natglas T & D | |
| Natvar 400/461 | |
| Silicone Rubber Coated Fiberglass | |
| Vinyl Coated Glass Grade A | |
| Vinyl Coated Glass Grade B | |
| Vinyl Coated Glass Grade C | |
| Nichias |
| 9003-150@ | |
| 9003-300@ | |
| 9003-600@ | |
| P LEO & CO LTD [E176865] - Recognized Component |
| 2T-TFL-xx.x (a) | |
| 2T-TFS-xx.x (a) | |
| 2T-TFT-xx.x (a) | |
| Varflex |
| Silflex | |
| Varglas S1600 | |
| VARFLEX CORP [E53690] - Recognized Component |
| Varglas 231, Varglas Viton 231 | |
| Varglas Non-Fray H | |
| Varglas Non-Fray HO | |
| Varglas Non-Fray HP | |
| VARFLEX CORP [E63450] - Recognized Component |
| Varglas | |
| Varglas ES-4400 | |
| Varglas Silicone Resin 500 | |
| Various Manufacturers |
| Untreated Fiberglass | |
| Zeus Company LLC [E64007] - Recognized Component |
| TFE-HW-300 | |
| TFE-HW-600 | |
| TFE-LW-150 | |
| Tie Cords |
| tie cords are optional for this system |
| Designation | comments |
| American Efird Inc. |
| LP 346 | |
| American Thread |
| Spun Dee | |
| Varflex |
| Fiberglass, Untreated | |
| Various Manufacturers |
| Glass "Nomex" Yarn | |
| Western Filament |
| EM2-CL | |
| NRT 3CL | |
| Tefglass | |
| Potting Compounds |
| potting compounds are optional for this system |
| Designation | comments |
| Epoxylite Corp. |
| 6203 | |
| 8822 | |
| Varnishes |
| varnishes are optional for this system |
| Designation | comments |
| ELANTAS PDG, Inc. [E75225] - Recognized Component |
| 468-2 (d), 468-2FC (d), 468-2-7-xxF (d), 468-2-7FC-xxF (d) | |
| ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component |
| 468-2 (d), 468-2FC(d) | |