Electrical Insulation System Components E200050
P LEO & CO LTD
UNIT 210, 2nd FLOOR, BUILDING 8W PHASE TWO, HONG KONG SCIENCE PARK, PAK SHEK KOK, NT HK
System Component System Designation System Class
0L50, 0L55, 1A025, 1G006, 1G015, 1G027A, 1G130 (o), 1G155, 1G180, 1G200, 1H818 (m), 1H850 Black (q), 1H850 Natural (o), 1H860 (f), 1H866 (g), 1H86A (o), 1H86B, 1H86R (g), 1K063CR, 1K7170, 1K7171A, 1K7172, 1K7270, 1N008, 1P130-3 (b) ($), 1P350 (e), 1P700 (b), 1P701 (b), 1P702 (b), 1P703, 1P705, 1P707 (b), 1P717 (b), 1P751, 1P756 (h), 1P801, 1P802, 1P830, 1P833 xx (@), 1P9FR * (a), 1PEN2, 1PEN3, 1PG880 (o), 1PK825, 1PN2R, 1PN2R, 1PN3R, 1PN3R, 1PN820 (o), 1PN828 (o), 2T-TFL-xx.x (a), 2T-TFS-xx.x (a), 2T-TFT-xx.x (a), RP65, SM61, SR315T, SR853T N86 200(N)
Report Date: 1998-12-30 © 2024 UL LLC
Construction Details (Table I)
The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under insulation function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers below indicated are minimum.
Filament Wire
Additional Ground & Interwinding insulation is required to separate this winding from other windings or between this winding and grounded/dead metal
Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
Recognized Component Appliance Wiring Material (AVLV2) listed below
Unless otherwise noted, winding wire types listed below may be used in combination within a single product
Han Kyung
HK SW-2A15 (0.38)Recognized Appliance Wiring Material (AVLV2), silicone rubber rated 200C, must be isolated from direct contact with windings by any Ground or phase ,Packaging must show Cat. No.
Nikkan Industries
WP-60-10S, WPT-60-10Ssilicone rubber (0.60mm) w/ silicone impregnated braiding (0.15mm)
Nissei Electric Co.
RSU-Tsilicone rubber (0.70mm) w/ silicone impregnated braiding (0.15mm)
Yung Chang Silicone Co.
Y-SRPWsilicone rubber (0.65mm) w/ silicone impregnated braiding (0.2mm)
Enameled Wire
Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
Ground Insulation is required to separate this winding from grounded/dead metal
Interwinding Insulation is required to separate this winding from other enameled wire
Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product
ANSI TypeTemp(°C)Basecoat(Topcoat)
MW 35or 200°CPolyester-amide-imide (Polyamide-imide)
MW 36or 200°CPolyester-amide-imide (Polyamide-imide)
MW 73or 200°CPolyester-amide-imide (Polyamide-imide)
MW 74or 200°CPolyester-amide-imide
Bare Conductor - wrapped with any Nomex Ground in this Table 2mils(0.051mm) min.
Ground and Interwinding Insulations
Designationmils(mm)comments
DuPont Specialty Products USA, LLC [E34739] - Recognized Component
Nomex® 4105 (0.13)
Nomex® 41110 (0.25)
Nomex® 4143 (0.08)
Nomex® 416, 416 LAM3 (0.08)
Nomex® 419 *** this product is no longer Recognized *** 7 (0.18)
Nomex® 464, 464 LAM3 (0.08)
Nomex® 992, 992PSB63 (1.6)
Nomex® 993, 993PSB40 (1.02)
Nomex® 994, 994PSB40 (1.02)
Nomex® E56, 3567 (0.18)
Mylar Specialty Films [E93687] - Recognized Component
KALADEX Kaladex 2000Prefixed with "N" representng: laminated Nomex 410, 416 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
P LEO & CO LTD [E126174] - Recognized Component
1P756 (h)Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
1P801Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
1P802Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
1PN2RPrefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
1PN3RPrefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
Lead Wires
lead wires are optional for this system
TempInsulation
200°CSR - silicone rubber(with or without braid)
200°CPTFE - polytetrafluoroethylene
200°CFEP - fluorinated ethylene propylene
Minor Sheet Materials
(layer, outer, wrap etc.) minor sheet is optional for this system
Designationcomments
3M Innovative Paper Technologies
CeQuin 3000
TufQuin 100, 110, 120
DuPont Specialty Products USA, LLC [E34739] - employing Recognized materials
Nomex® 410
Nomex® 411
Nomex® 414
Nomex® 416, 416 LAM
Nomex® 418, 818, 864LAM
Nomex® 464, 464 LAM
Nomex® 992, 992PSB
Nomex® 993, 993PSB
Nomex® E56, 356
E. I. Dupont de Nemours & Co.
Kapton
Kapton CR
Kapton HN
Nomex® E56A
Nomex® N196
P. Leo
RP65
SM61
SR315T
SR853T
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material
Tapes
tapes are optional for this system
Designationcomments
Daeil
127polyester film
Hyupsung
Korta 210
P Leo & Co (B C) Ltd
0L50
0L55
1K7172silicone adhesive, polyimide film
P LEO & CO LTD [E126174] - Listed or Recognized Component
1A025
1G006
1G015
1G027A
1G130 (o)
1G155
1G180
1G200
1H818 (m)
1H850 Black (q)
1H850 Natural (o)
1H860 (f)
1H861 (f) *** this product is no longer Recognized ***
1H862 (f) *** this product is no longer Recognized ***
1H863 (f) *** this product is no longer Recognized ***
1H866 (g)
1H86A (o)
1H86B
1H86R (g)
1K063CR
1K7170
1K7171A
1K7177 *** this product is no longer Recognized ***
1K7270
1N008
1P130-3 (b) ($)
1P350 (e)
1P700 (b)
1P701 (b)
1P702 (b)
1P703
1P705
1P707 (b)
1P717 (b)
1P751
1P800 (t)+ *** this product is no longer Recognized ***
1P801
1P802
1P802 (k) *** this product is no longer Recognized ***
1P808 (t)+ *** this product is no longer Recognized ***
1P830
1P833 xx (@)
1P9FR * (a)
1PEN2
1PEN3
1PG880 (o)
1PK825
1PN2R
1PN3R
1PN820 (o)
1PN828 (o)
Core tubes and Bobbins
(for mechanical support only) cores are optional for this system
Designationcomments
CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials
Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)
SUMITOMO BAKELITE CO LTD [E41429] - employing Recognized materials
SUMIKON PM-9630
SUMIKON PM-9820, PM-9825
Spacer and Wedges
spacer and wedges are optional for this system
Designationcomments
Glastic Corp.
1312
1911
FHT
MTS rod
SG-200
SG-200 rod
TSFpolyester/glass
K.E.T.
MG-630823
SWECO INC [E115870] - employing Recognized materials
SK 641
SK 661
any material described in this table with no thickness requirement may be used as a spacer or a wedge
Tubing and Sleeving
tubing and sleeving are optional for this system
Designationcomments
P LEO & CO LTD [E176865] - Recognized Component
2T-TFL-xx.x (a)
2T-TFS-xx.x (a)
2T-TFT-xx.x (a)
P LEO & CO LTD [E195829] - Recognized Component
2R-SG# *** this product is no longer Recognized ***
P. Leo & Co Ltd
2R-YG
Varflex
Silicone Resin 500 H-B-1
Silicone Resin 500 H-C-1
Silicone Resin 500 H-C-2
Silicone Rubber ES 4400 H-A-1
Silicone Rubber ES 4400 H-B-1
Silicone Rubber ES 4400 H-C-1
Silicone Rubber H-B-1
Varglas H-A-1
Varglas H-C-1
Varglas Silicone Resin 500 H-A-1
Varglas Viton 231 H-A-1
Varglas Viton 231 H-C-1
VARFLEX CORP [E53690] - Recognized Component
Varglas Non-Fray H
Varglas Non-Fray HO
Varglas Non-Fray HP
Tie Cords
tie cords are optional for this system
Designationcomments
Teijin
Polyester
Toray
Polyester
Various Manufacturers
Fiberglass, untreated
Western Filament
24/140
50DOF17W
DHS-1CL
DRT-45CL
DRT-45X
Varnishes
Designationcomments
E-WEON CHEMTECH CO LTD [E101220] - Recognized Component
TSHP *** this product is no longer Recognized and may not be suitable for use in this system *** not valid for use with Nissei wires.
TSHP-F *** this product is no longer Recognized and may not be suitable for use in this system *** not valid for use with Nissei wires.
ELANTAS Europe S.r.l. [E73288] - Recognized Component
DOBECKAN FT-2004/*EK, DOBECKAN FT-2004/*UVfor use only with ANSI Type MW35 magnet, Han Kyung wires or a Nomex wrapped bare conductor.
ELANTAS PDG, Inc. [E75225] - Recognized Component
468-2 (d), 468-2FC (d), 468-2-7-xxF (d), 468-2-7FC-xxF (d)for use only with a Nomex wrapped bare conductor.
50(+3)(&), 50SM(+3)(&), 50VT(+3)(&), 50S(+3)(&), 50VTC(+3)(&), 5180(+3)(&), 5183(+3)(&), 5180 VT(+3)(&), ELAN-Dur 822A01(&), CORONA-Protect 828A01(&)
ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component
468-2 (d), 468-2FC(d)
50 (e), 50S (e), 50SM (e), 50VT (e), 50VTC (e), 5180 (e), 5183 (e), 5183SW, ELAN-Dur 822A01, CORONA-Protect 828A01
KYOCERA Corporation [E83702] - Recognized Component
TVB2166for use only with ANSI Type MW35 magnet, Young Chan or Han Kyung wires or a Nomex wrapped bare conductor.
NOROO PAINT & COATINGS CO LTD [E93947] - Recognized Component
DVB-2152 (#)for use only with ANSI Type MW35 magnet, Young Chan or Han Kyung wires or a Nomex wrapped bare conductor.

© 2024 UL LLC