| Filament Wire |
| Additional Ground & Interwinding insulation is required to separate this winding from other windings or between this winding and grounded/dead metal |
| Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below |
| Recognized Component Appliance Wiring Material (AVLV2) listed below |
| Unless otherwise noted, winding wire types listed below may be used in combination within a single product |
| Han Kyung |
| HK SW-1 | | Recognized Appliance wire with 0.70mm silicone rubber coating and 0.15mm Dow Corning varnish DC6-2230 ipmregnated polyester braiding |
| Nikkan Industries |
| WP-60-10S, WPT-60-10S | | silicone rubber (0.60mm) w/ silicone impregnated braiding (0.15mm) |
| Nissei Electric Co. |
| RSU-T | | silicone rubber (0.70mm) w/ silicone impregnated braiding (0.15mm) |
| Yung Chang Silicone Co. |
| Y-SRPW | | silicone rubber (0.65mm) w/ silicone impregnated braiding (0.2mm) |
| Enameled Wire |
| Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below |
| Ground Insulation is required to separate this winding from grounded/dead metal |
| Interwinding Insulation is required to separate this winding from other enameled wire |
| Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product |
| ANSI Type | Temp(°C) | Basecoat(Topcoat) |
| MW 35 | or 200°C | Polyester-amide-imide (Polyamide-imide) |
| Minor Sheet Materials |
| (layer, outer, wrap etc.) minor sheet is optional for this system |
| Designation | comments |
| E. I. Dupont de Nemours & Co. |
| Nomex® | |
| any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material |
| Tapes |
| tapes are optional for this system |
| Designation | comments |
| Daeil |
| 127 | polyester film |
| Duck Sung Hitech Co., Lt |
| DTS-204A | |
| Hyupsung |
| Korta 210 | |
| P Leo & Co (B C) Ltd |
| 1P830 | acrylic adhesive, polyester film |
| SM661 | |
| P LEO & CO LTD [E126174] - Listed or Recognized Component |
| 1N155 | |
| 1P833 xx (@) | |
| SWECO |
| ANT-155 | Nomex, adhesive |
| Spacer and Wedges |
| spacer and wedges are optional for this system |
| Designation | comments |
| K.E.T. |
| MG-630823 | |
| SWECO INC [E115870] - employing Recognized materials |
| SK 641 | |
| SK 661 | |
| any material described in this table with no thickness requirement may be used as a spacer or a wedge |
| Tubing and Sleeving |
| tubing and sleeving are optional for this system |
| Designation | comments |
| Sung-Won Electric Co Inc |
| 2MR | |
| 3MR | |
| 5MR | |
| Tie Cords |
| tie cords are optional for this system |
| Designation | comments |
| Various Manufacturers |
| Fiberglass, untreated | |
| Varnishes |
| Designation | comments |
| Dow Silicones Corp [E74653] - Recognized Component |
| Dow Corning® DC-997, Dow Corning® XIAMETER® RSN-0997 | |
| E-WEON CHEMTECH CO LTD [E101220] - Recognized Component |
| TSHP *** this product is no longer Recognized and may not be suitable for use in this system *** | |
| TSHP-F *** this product is no longer Recognized and may not be suitable for use in this system *** | for use only with ANSI Type MW35 magnet wire or WP-60-10S by Nikkan Industries or RSU-T by Nissei |
| NOROO PAINT & COATINGS CO LTD [E93947] - Recognized Component |
| DVB-2152 (#) | |