UL iQ™ for Electrical Insulation Systems

Electrical Insulation System Components		E200050
P LEO & CO LTD
UNIT 210, 2nd FLOOR, BUILDING 8W PHASE TWO, HONG KONG SCIENCE PARK, PAK SHEK KOK, NT HK
System Component	System Designation	System Class
1A025, 1G006, 1G015, 1G027A, 1G130 (o), 1G155, 1G180, 1H818 (m), 1H860 (f), 1H866 (g), 1H86A (o), 1H86R (g), 1K063, 1K063CR, 1K7170, 1K7171A, 1K7172, 1K7270, 1N008, 1N012, 1P130, 1P133 (f), 1P350 (e), 1P700 (b), 1P701 (b), 1P702 (b), 1P703, 1P705, 1P707 (b), 1P751, 1P800, 1P801, 1P802, 1P808, 1P830, 1P833 xx (@), 1PEN2, 1PEN3, 1PN2R, 1PN3R, 2T-TFL-xx.x (a), 2T-TFS-xx.x (a), 2T-TFT-xx.x (a), 8M81, D/PEN, DM, DMD###, DPD###, L/PEN/L&, N###/1N012(), N###/N155(), N###/OL50(*), N###/PEN&, N/PEN/N (N###PEN/N&, NMN (N###MN&), OL50/N###OL50(*), PB-2, SM61, SM62, TK-####, TP-####	N89	200(N)
Report Date: 1999-06-03	© 2024 UL LLC

Construction Details (Table I)

Complies with IEC Publication 85

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under insulation function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers below indicated are minimum.

Filament Wire
Additional Ground & Interwinding insulation is required to separate this winding from other windings or between this winding and grounded/dead metal
Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
Recognized Component Appliance Wiring Material (AVLV2) listed below
Unless otherwise noted, winding wire types listed below may be used in combination within a single product
	Han Kyung
	AWM Style 3132		constructed with R/C polyester basecoat with polyamid-imide topcoat, rated 220C
Enameled Wire
Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
Ground Insulation is required to separate this winding from grounded/dead metal
Interwinding Insulation is required to separate this winding from other enameled wire
Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product
	ANSI Type	Temp(°C)	Basecoat(Topcoat)
	MW 35	or 200°C	Polyester-amide-imide (Polyamide-imide)
	MW 73	or 200°C	Polyester-amide-imide (Polyamide-imide)
	MW 74	or 200°C	Polyester-amide-imide
	Bare Conductor - Bare conductor insulated with Dupont's Nomex materials listed for Ground and Interwinding Insulation, min. thickness 2.0 mils, 50% overlap; bare conductor or PTFE lead wire insulated with Dupont's Kaladex or Quin-T Corp's CeQuin materials or silico

Ground and Interwinding Insulations
	Designation	mils(mm)	comments
	3M Innovative Paper Technologies
	CeQuin 3000	5.0 (0.13)
	3M Innovative Paper Technologies [E65069] - Recognized Component
	TufQUIN 110	5.0 (0.13)
	BASF CORP [E36632] - Recognized Component
	Petra 130(+)(f1)(t6)	20.0 (0.51)
	CELANESE INTERNATIONAL CORP [E41938] - Recognized Component
	Rynite 530 (f1) (+), 530L (f1) (+)	20.0 (0.51)
	Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)	20.0 (0.51)
	DuPont Specialty Products USA, LLC [E34739] - Recognized Component
	Nomex® 410	5.0 (0.13)
	Nomex® 411	11.5 (0.29)
	Nomex® 414	5.0 (0.13)
	Nomex® 416, 416 LAM	5.0 (0.13)
	Nomex® 418, 818, 864LAM	5.0 (0.13)
	Nomex® 464, 464 LAM	5.0 (0.13)
	Nomex® 992, 992PSB	10.0 (0.25)
	Nomex® 993, 993PSB	8.25 (0.21)
	Nomex® 994, 994PSB	8.25 (0.21)
	E. I. Dupont de Nemours & Co.
	Nomex® 424	5 (0.13)	aramid insulating paper
	Nomex® 425	5 (0.13)	aramid insulating paper
	Nomex® E56A	7.5 (0.19)
	Fibertek
	NMN	3-3-3[layers]	Nomex 410, 416 or 464
	Mylar Specialty Films [E93687] - Recognized Component
	KALADEX Kaladex 1030 * this product is no longer Recognized *	1.0 (0.03)
	P LEO & CO LTD [E126174] - Recognized Component
	1PEN2
	1PEN3
	1PN2R
	1PN3R	1.0 (0.03)
	P. Leo
	L/PEN/L***		L Represents Polyester Film, PEN represents Kaladex film, minimum 1 mil thickness. *** represents each layer thickness in mils
	N###/1P801
	N###/1P802
	N###/1PEN2
	N###/1PN2R
	N/PEN/N (N###PEN/N&		N### represents Nomex 410,411,414,416,464,418,419, E56A. M represents Polyester Film. PEN represents Kaladex. * represents each layer thickness in mils. & - indicates any thickness of Polyester or Kaladex.
	N410MICA5(0.4)		N410 represents Nomex 410, thickness of 5 mils
	NMN (N###MN&)		N### represents Nomex 410,411,414,416,464,418,419, E56A. M represents Polyester Film. PEN represents Kaladex. * represents each layer thickness in mils. & - indicates any thickness of Polyester or Kaladex.
	TOYOBO CO LTD [E51743] - Recognized Component
	Teonex Film NQ510, Q5100, Q5300, Q8100, Q8300	1.0 (0.03)

Lead Wires
lead wires are optional for this system
	Temp	Insulation
	180°C	SR - silicone rubber(with or without braid) +
	200°C	SR - silicone rubber(with or without braid)
	200°C	PTFE - polytetrafluoroethylene
	200°C	ETFE - ethylene tetrafluoroethylene
	200°C	FEP - fluorinated ethylene propylene
	220°C	SR - Silicone rubber(with or without braid)
	+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.

Minor Sheet Materials
(layer, outer, wrap etc.) minor sheet is optional for this system
	Designation	comments
	DuPont Specialty Products USA, LLC [E34739] - employing Recognized materials
	Nomex® 410
	Nomex® 411
	Nomex® 414
	Nomex® 416, 416 LAM
	Nomex® 419 * materials are no longer Recognized *
	Nomex® 464, 464 LAM
	Nomex® 992, 992PSB
	Nomex® 993, 993PSB
	Nomex® E56, 356
	E. I. Dupont de Nemours & Co.
	Kaladex 2030
	Kapton CR
	Kapton HN
	Kapton PST
	Nomex® E56A
	Nomex® N196
	Mylar Specialty Films [E93687] - employing Recognized materials
	KALADEX Kaladex 2000
	P. Leo
	8M81
	8M82
	D/PEN**	** - thickness of film
	DM**	* - represents each layer thickness in mils.
	DMD###	### = layer thickness in mils
	DPD###	### = layer thickness in mils
	L/PEN/L&	* - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
	N###/1N012(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1N012 is a tape by P. Leo
	N###/1P801(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1P801 is a tape by P. Leo
	N###/1P802(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1P802 is a tape by P. Leo
	N###/K/N&	N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
	N###/N155(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. N155 is a tape by P. Leo
	N###/OL50(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. OL50 is UL Recognized under file MH18339
	N###/PEN&	N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
	N###/PEN2(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1PEN2 is a tape by P. Leo
	N###/PN2R(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. PN2R is a tape by P. Leo
	N###M*&	N### or N is Nomex 410,411,414,416,418,419,464,E56,E56A. * - represents each layer thickness. & - thickness of polyester or Kaladex 2000.
	N###MN&	N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
	N###PEN/N&	N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
	OL50/N###OL50(**)	N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. OL50 is UL Recognized under file MH18339
	PB-2
	SM61
	SM62
	TK-####	# - represents thickness layer in mils
	TP-####	# - represents thickness layer in mils
	Sung Won Electric
	DMD	Polyester nonwoven/plyester film/Polyester nonwoven in any combination
	NTN	Nomex/Polyester/Nomex
	VDMD	Varnished DMD in any combination
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material
Tapes
tapes are optional for this system
	Designation	comments
	P Leo & Co (B C) Ltd
	1K7172	silicone adhesive, polyimide film
	1P130	acrylic adhesive, polyester film
	1P800	polyester film
	1P808	polyester film
	1P830	acrylic adhesive, polyester film
	1P9FR
	1TF07
	P LEO & CO LTD [E126174] - Listed or Recognized Component
	1A025
	1G006
	1G015
	1G027A
	1G130 (o)
	1G155
	1G180
	1H818 (m)
	1H850 Black (q)
	1H850 Natural (o)
	1H860 (f)
	1H861 (f) * this product is no longer Recognized *
	1H862 (f) * this product is no longer Recognized *
	1H863 (f) * this product is no longer Recognized *
	1H866 (g)
	1H86A (o)
	1H86R (g)
	1K063
	1K063CR
	1K7170
	1K7171A
	1K7177 * this product is no longer Recognized *
	1K7270
	1N008
	1N012
	1N155
	1P133 (f)
	1P135 (c) * this product is no longer Recognized *
	1P350 (e)
	1P700 (b)
	1P701 (b)
	1P702 (b)
	1P703
	1P705
	1P707 (b)
	1P717 (b)
	1P751
	1P801
	1P802
	1P802 (k) * this product is no longer Recognized *
	1P833 xx (@)
	1PEN2
	1PEN3
	1PG880 (o)
	1PN2R
	1PN3R
	1PN820 (o)
	1TF05
	SWECO
	AGT-180	adhesive, glass cloth
	AKT-180
	ANT-155	Nomex, adhesive
Core tubes and Bobbins
(for mechanical support only) cores are optional for this system
	Designation	comments
	CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials
	Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)
	SUMITOMO BAKELITE CO LTD [E41429] - employing Recognized materials
	SUMIKON PM-9630
	SUMIKON PM-9750
	SUMIKON PM-9820, PM-9825
	SUMIKON PM-9850
Spacer and Wedges
spacer and wedges are optional for this system
	Designation	comments
	Glastic Corp.
	FHT
	MTS rod
	SG-200
	TSF	polyester/glass
	Sun Won Electric Co Inc (SWECO)
	EGL
	MFGL
	SWECO INC [E115870] - employing Recognized materials
	SK 661
	Various Manufacturers
	Wood, Untreated
any material described in this table with no thickness requirement may be used as a spacer or a wedge
Tubing and Sleeving
tubing and sleeving are optional for this system
	Designation	comments
	P LEO & CO LTD [E176865] - Recognized Component
	2T-TFL-xx.x (a)
	2T-TFS-xx.x (a)
	2T-TFT-xx.x (a)
	P LEO & CO LTD [E195829] - Recognized Component
	2R-SG# * this product is no longer Recognized *
	P. Leo & Co Ltd
	2R-YG
	Stone Industries
	Nomex
	Sung-Won Electric Co Inc
	S/G	silicone rubber coated fiberglass
	Varflex
	Silicone Resin 500 H-B-1
	Silicone Rubber ES 4400 H-A-1
	Silicone Rubber H-B-1
	Varglas H-A-1
	Varglas H-C-1
	Varglas Silicone Resin 500 H-A-1
	Varglas Viton 231 H-A-1
	Varglas Viton 231 H-C-1
	VARFLEX CORP [E53690] - Recognized Component
	Varglas Non-Fray H
	Varglas Non-Fray HM
	Varglas Non-Fray HP
Tie Cords
tie cords are optional for this system
	Designation	comments
	Teijin
	Polyester
	Toray
	Polyester
	Various Manufacturers
	Fiberglass, unimpregnated
	Western Filament
	50DOF17W
	DHS-1CL
	DRT-45CL
	DRT-45X
	Poly Sleeving
Varnishes
	Designation	comments
	ELANTAS PDG, Inc. [E75225] - Recognized Component
	468-2 (d), 468-2FC (d), 468-2-7-xxF (d), 468-2-7FC-xxF (d)	(+) - May be replaced by prefix "E" and may be followed by a one to five alphanumeric suffix indicated percent of inert filler and/or color.
	50(+3)(&), 50SM(+3)(&), 50VT(+3)(&), 50S(+3)(&), 50VTC(+3)(&), 5180(+3)(&), 5183(+3)(&), 5180 VT(+3)(&), ELAN-Dur 822A01(&), CORONA-Protect 828A01(&)	(+3) - May be followed by XXF. Where XX designates level of inorganic filler and letter F or filler.
	ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component
	60-60, 60-60S, 60-60VT, 60-60VT-200, 8180, 8183, 8180HV, 8183HV, 8180LV, 8183LV, 8183SW, 60-65S, 60-65SLV, 60-65S-30F, ELAN-Dur 822A03	Recognized Component Varnish (OBOR2), with or without silica filled.