Electrical Insulation System Components E200050
P LEO & CO LTD
UNIT 210, 2nd FLOOR, BUILDING 8W PHASE TWO, HONG KONG SCIENCE PARK, PAK SHEK KOK, NT HK
System Component System Designation System Class
1A025, 1G006, 1G015, 1G027A, 1G130 (o), 1G180, 1H850 Black (q), 1H850 Natural (o), 1H860 (f), 1H866 (g), 1H86A (o), 1K063, 1K063CR, 1K7170, 1K7171A, 1K7172, 1K7270, 1N008, 1N012, 1N155, 1P130, 1P133 (f), 1P350 (e), 1P700 (b), 1P701 (b), 1P702 (b), 1P703, 1P705, 1P707 (b), 1P717 (b), 1P751, 1P800, 1P801, 1P802, 1P808, 1P830, 1P833 xx (@), 1P9FR, 1PEN2, 1PG880 (o), 1PG888, 1PK825, 1PN2R, 1PN2S, 1PN820 (o), 1PN828 (o), 2T-TFL-xx.x (a), 2T-TFS-xx.x (a), 2T-TFT-xx.x (a), D/M###, D/PEN**, DMD###, DPD###, L/PEN/L**, Mica#RP65, Mica#SM61, Mica#SM62, N###/1K7171(**), N###/1N012(**), N###/1P801(**), N###/1P802(**), N###/K/N*&*, N###/N155(**), N###/OL50(**), N###/PEN*&*, N###/PEN2(**), N###/PEN2500*&*, N###/PN2R(**), N###M*&*, N###MICA*&*(%), N###MN*&*, N###PEN/MICA*&*(%), N###PEN/N*&*, N411/M/N*&*, NMN-E*&* or NTN*&*, OL50/N###OL50(**), PEN/N411/M/N*&*, RP65, TK-####, TP-#### R81 220(R)
Report Date: 2001-05-30 © 2024 UL LLC
An Authorization Letter is Required for Adoption of this System
Construction Details (Table I)
The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under insulation function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers below indicated are minimum.
Filament Wire
Additional Ground & Interwinding insulation is required to separate this winding from other windings or between this winding and grounded/dead metal
Recognized Component Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
Recognized Component Appliance Wiring Material (AVLV2) listed below
Unless otherwise noted, winding wire types listed below may be used in combination within a single product
Bo Sung
SRPWsilicone rubber (0.65mm) w/ silicone impregnated polyester braiding (0.15mm)
Han Kyung
HK SW-1Recognized Appliance wire with 0.70mm silicone rubber coating and 0.15mm Dow Corning varnish DC6-2230 ipmregnated polyester braiding
HK SW-2ARecognized Appliance Wiring Material (AVLV2), silicone rubber rated 200C, must be isolated from direct contact with windings by any Ground or phase ,Packaging must show Cat. No.
HK-SW-2
Nikkan Industries
WP-60-10S, WPT-60-10Ssilicone rubber (0.60mm) w/ silicone impregnated braiding (0.15mm)
Various Manufacturers
MW60 or MW61 or Bare Conductor insulated with any Nomex ground insulation type authorized in the Ground Insulation sectionminimum thickness of 2 mils
OBMW2, polyester basecoat with polyamide-imide topcoat, rated 220C
OBMW2, polyester-imide basecoat with polyamide-imide topcoat, rated 220 C
Yung Chang Silicone Co.
Y-SRPWsilicone rubber (0.65mm) w/ silicone impregnated braiding (0.2mm)
Ground and Interwinding Insulations
Designationmils(mm)comments
DuPont Specialty Products USA, LLC [E34739] - Recognized Component
Nomex® 4105 (0.13)
Nomex® 41110 (0.25)
Nomex® 4145 (0.13)
Nomex® 416, 416 LAM5 (0.13)
Nomex® 418, 818, 864LAM3 (0.08)
Nomex® 419 *** this product is no longer Recognized *** 7 (0.18)
Nomex® 464, 464 LAM5 (0.13)
Nomex® 992, 992PSB63 (1.6)
Nomex® 993, 993PSB40 (1.02)
Nomex® 994, 994PSB40 (1.02)
Nomex® E56, 3567 (0.18)
P. Leo
N###/1P801
N###/1P802
N###/1PEN2
N###/1PN2R
N###MICA(%)% - mica thickness (mm)
N###PEN/MICAN### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464; 10 mils for Nomex
N/PEN/N (N###PEN/N*&*N### represents Nomex 410,411,414,416,464,418,419, E56A. M represents Polyester Film. PEN represents Kaladex. * represents each layer thickness in mils. & - indicates any thickness of Polyester or Kaladex.
NMN (N###MN*&*)N### represents Nomex 410,411,414,416,464,418,419, E56A. M represents Polyester Film. PEN represents Kaladex. * represents each layer thickness in mils. & - indicates any thickness of Polyester or Kaladex.
Various Manufacturers
Nomex Laminates containing 5 mils of Nomex 416 and/or 464
Lead Wires
lead wires are optional for this system
TempInsulation
200°CSR - silicone rubber(with or without braid) +
200°CPTFE - polytetrafluoroethylene +
200°CFEP - fluorinated ethylene propylene +
+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.
Minor Sheet Materials
(layer, outer, wrap etc.) minor sheet is optional for this system
Designationcomments
DuPont Specialty Products USA, LLC [E34739] - employing Recognized materials
Nomex® 410
Nomex® 411
Nomex® 414
Nomex® 416, 416 LAM
Nomex® 418, 818, 864LAM
Nomex® 419 *** materials are no longer Recognized ***
Nomex® 464, 464 LAM
Nomex® 992, 992PSB
Nomex® 993, 993PSB
Nomex® E56, 356
E. I. Dupont de Nemours & Co.
Kaladex 2500
Kapton CR
Kapton HN
Kapton PST
Nomex® E56A
Nomex® N196
Mylar Specialty Films [E93687] - employing Recognized materials
KALADEX Kaladex 2000
P. Leo
D/M###### = layer thickness in mils
D/PEN**** - thickness of film
DMD###### = layer thickness in mils
DPD###### = layer thickness in mils
L/PEN/L**** - represents thickness of film
Mica#RP65
Mica#SM61
Mica#SM62
N###/1K7171(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1K7171 is a tape by P. Leo
N###/1N012(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1N012 is a tape by P. Leo
N###/1P801(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1P801 is a tape by P. Leo
N###/1P802(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1P802 is a tape by P. Leo
N###/K/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
N###/N155(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. N155 is a tape by P. Leo
N###/OL50(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. OL50 is UL Recognized under file MH18339
N###/PEN*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
N###/PEN2(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1PEN2 is a tape by P. Leo
N###/PEN2500*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
N###/PN2R(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. PN2R is a tape by P. Leo
N###M*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
N###MICA*&*(%)N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. (%) - mica thickness in (mm)
N###MN*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
N###PEN/MICA*&*(%)N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film. (%) - mica thickness in (mm)
N###PEN/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
N411/M/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
NMN-E*&* or NTN*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
OL50/N###OL50(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. OL50 is UL Recognized under file MH18339
PB-2
PEN/N411/M/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
RP65
TK-##### - represents thickness layer in mils
TP-##### - represents thickness layer in mils
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material
Tapes
tapes are optional for this system
Designationcomments
P Leo & Co (B C) Ltd
0L50
0L55
1K7172silicone adhesive, polyimide film
1P130acrylic adhesive, polyester film
1P800polyester film
1P808polyester film
1P830acrylic adhesive, polyester film
1P9FR
1PG888
1PN2R
1PN2S
1PN3R
P LEO & CO LTD [E126174] - Listed or Recognized Component
1A025
1G006
1G015
1G027A
1G130 (o)
1G155
1G180
1H818 (m)
1H850 Black (q)
1H850 Natural (o)
1H860 (f)
1H866 (g)
1H86A (o)
1H86R (g)
1K063
1K063CR
1K7170
1K7171A
1K7177 *** this product is no longer Recognized ***
1K7270
1N008
1N012
1N155
1P133 (f)
1P135 (c) *** this product is no longer Recognized ***
1P350 (e)
1P700 (b)
1P701 (b)
1P702 (b)
1P703
1P705
1P707 (b)
1P717 (b)
1P751
1P801
1P802
1P802 (k) *** this product is no longer Recognized ***
1P833 xx (@)
1PEN2
1PEN3
1PG880 (o)
1PK825
1PN820 (o)
1PN828 (o)
Core tubes and Bobbins
(for mechanical support only) cores are optional for this system
Designationcomments
CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials
Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)
L.G. Chemical
GP23406
Ningbo Huateng Shouyan Hightech Co Ltd [E97523] - employing Recognized materials
KAIFA 301-G30
POLYPLASTICS CO LTD [E213445] - employing Recognized materials
DURANEX 2016(e)
DURANEX 3226(e)
SABIC INNOVATIVE PLASTICS US L L C [E121562] - employing Recognized materials
Valox 420SE0(f1)(w)(GG)(rr1)
TORAY INDUSTRIES INC [E41797] - employing Recognized materials
1401
Spacer and Wedges
spacer and wedges are optional for this system
Designationcomments
K.E.T.
MG-630823
SWECO INC [E115870] - employing Recognized materials
SK 641
SK 661
any material described in this table with no thickness requirement may be used as a spacer or a wedge
Tubing and Sleeving
tubing and sleeving are optional for this system
Designationcomments
P LEO & CO LTD [E176865] - Recognized Component
2T-TFL-xx.x (a)
2T-TFS-xx.x (a)
2T-TFT-xx.x (a)
P LEO & CO LTD [E195829] - Recognized Component
2R-SG# *** this product is no longer Recognized ***
P. Leo & Co Ltd
2R-YG
Tie Cords
tie cords are optional for this system
Designationcomments
Various Manufacturers
Fiberglass, untreated
Varnishes
Designationcomments
ELANTAS PDG, Inc. [E75225] - Recognized Component
50(+3)(&), 50SM(+3)(&), 50VT(+3)(&), 50S(+3)(&), 50VTC(+3)(&), 5180(+3)(&), 5183(+3)(&), 5180 VT(+3)(&), ELAN-Dur 822A01(&), CORONA-Protect 828A01(&)
ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component
60-60, 60-60S, 60-60VT, 60-60VT-200, 8180, 8183, 8180HV, 8183HV, 8180LV, 8183LV, 8183SW, 60-65S, 60-65SLV, 60-65S-30F, ELAN-Dur 822A03

© 2024 UL LLC