Electrical Insulation System Components E87039
ELANTAS North America, Inc
5200 N 2nd St, Saint Louis MO 63147-3122
System Component System Designation System Class
468-2 (d), 468-2FC (d), 468-2-7-xxF (d), 468-2-7FC-xxF (d) DASH 2 HR-4 180(H)
Report Date: 1987-02-04 © 2025 UL LLC
Construction Details (Table I)
Complies with IEC Publication 85
The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under insulation function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers below indicated are minimum.
Enameled Wire
Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
Ground Insulation is required to separate this winding from grounded/dead metal
Interwinding Insulation is required to separate this winding from other enameled wire
Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product
ANSI TypeTemp(°C)Basecoat(Topcoat)
MW 35or 200°CPolyester-amide-imide (Polyamide-imide)
MW 73or 200°CPolyester-amide-imide (Polyamide-imide)
Ground and Interwinding Insulations
Designationmils(mm)comments
CELANESE INTERNATIONAL CORP [E41938] - Recognized Component
Rynite 530 (f1) (+), 530L (f1) (+)15 (0.38)
Lead Wires
lead wires are optional for this system
TempInsulation
150°CSR - silicone rubber(with or without braid) +
150°CXLPE - crosslinked polyethylene +
200°CSR - silicone rubber(with or without braid)
200°CPerfluoro-alkyl vinyl ether/AI/PET/EVA
+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.
Minor Sheet Materials
(layer, outer, wrap etc.) minor sheet is optional for this system
Designationcomments
3M Innovative Paper Technologies
CorQuin
Von Roll USA, Inc.
NKN
NMN
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material
Tapes
tapes are optional for this system
Designationcomments
3M (Minnesota Mining & Mfg Co)
2540unimpregnated, reinforced non-woven polyester web
3M COMPANY [E17385] - Listed or Recognized Component
1 (a)
10 (a) *** this product is no longer Recognized ***
1205
1318 clear (a)
1318-1 (a)
1318-2 (a)
1339
20 (a) *** this product is no longer Recognized ***
27 (a)
44 (a)
46
55
56 (a)
57 (a)
60
69 (a), 9 (a)
75
79
92
IDEAL TAPE CO INC [E82910] - Listed or Recognized Component
IT-7017 (b)
IT-7170 (c)
IT-7177
IT-724 (b)
IT-725
IT-7270
IT-730 (b)
IT-7300
IT-7307
INTERTAPE POLYMER GROUP [E20780] - Listed or Recognized Component
4238 (16)*
4309 (6228)*
4428 (23)*
4429 (24)*
4616-00 (51)*
4617 (58)*
4618 (59)*
51579 (6161)
51580-00 (40)
51585 (6230)*
Intertape Polymer Group (Tesa, Tuck, Spinnaker)
44-3silicone adhesive, PTFE/glass cloth
51582
6323silicone adhesive, glass cloth
Kendall
292
295
765non-woven polyester
Nitto Inc [E20392] - Listed or Recognized Component
P-212 (P-212L, P-212PL)
P-213, P-213S, EE-7240
P-221 (P-221L, P-221PL, 6379)
P-224 AMB (formerly P-224)
P-243 (P-243 TAN)
P-245 (a) (P-245 BLK (a))
P-246
P-247
P-255
P-256
P-262
Nitto Permacel
P-21thermosetting rubber adhesive, glass cloth
P-249thermosetting rubber adhesive, polyester film/mat
P-257thermosetting rubber adhesive, polyester film
SAINT-GOBAIN PERFORMANCE PLASTICS CORP [E51201] - Listed or Recognized Component
G565
G569 *** this product is no longer Recognized ***
K103A
K250A (d)
M54A
M97 (b) *** this product is no longer Recognized ***
Saint-Gobain Performance Plastics Corp.
G551thermosetting rubber adhesive, glass cloth
M52silicone adhesive, polyester film
M56thermosetting rubber adhesive, polyester film
M64thermosetting rubber adhesive, polyester film
M99acrylic adhesive, polyester film
Spacer and Wedges
spacer and wedges are optional for this system
Designationcomments
Glastic Corp.
FHT
SG-200
any material described in this table with no thickness requirement may be used as a spacer or a wedge
Tubing and Sleeving
tubing and sleeving are optional for this system
Designationcomments
ATKINS & PEARCE INC [E63446] - Recognized Component
1151-FR
1151-XL-200
Atkins & Pearce Inc.
NU-FLEX WHS-25
DELFINGEN US-NEW YORK INC [E93101] - Recognized Component
NU Sleeve SG-200-A
NU-Sleeve T117 E, NU-Sleeve T117 HV
NU-Sleeve T117-FR
Hilec/Delfingen US-New York Inc
Turbo 117 H-A-1
Varflex
Varglas H-A-1
Varglas H-C-1
Varglas H-C-2
Varglas Silicone Resin 500 H-A-1
Tie Cords
tie cords are optional for this system
Designationcomments
Various Manufacturers
Fiberglass, untreated
Varnishes
Designationcomments
ELANTAS North America, Inc [E75225] - Recognized Component
468-2 (d), 468-2FC (d), 468-2-7-xxF (d), 468-2-7FC-xxF (d)
ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component
468-2 (d), 468-2FC(d)

© 2025 UL LLC