Electrical Insulation System Components E469673
Huizhou Fuwei Insulation Technology Co Ltd
Leng Tang, Shuai'An Formation, Tie Chang Cun, Shiwan Zhen, Boluo County, Huizhou Guangdong 516000 CN
System Component System Designation System Class
ACT, AH, AHA, AM, AMA, AMA-FR, AMA-P, AMAMA, ART, DM-H, DMD, DMD-H, FRP, FSG, GCT, GFT, GHG, GHG-P, GMG, GMG-P, HST, M102, N501, NH, NHN, NHN-P, NM, NMN, NMN-FR, NMN-P, NMNMN, P201, P701, P801, PFT, PGT, PI, PPST, SHS, SHS-P, TT, UWT, X401, X402 FUWEI 180-1 180(H)
Report Date: 2016-11-03 © 2025 UL LLC
alternate constructions:
An Authorization Letter is Required for Adoption of this System
Construction Details (Table II)
The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under insulation function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers below indicated are minimum.
Enameled Wire
Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
Ground Insulation is required to separate this winding from grounded/dead metal
Interwinding Insulation is required to separate this winding from other enameled wire
Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product
ANSI TypeTemp(°C)Basecoat(Topcoat)
MW 35or 200°CPolyester-amide-imide (Polyamide-imide)
MW 35-Aor 220°CPolyester-amide-imide (Polyamide-imide)
MW 36or 200°CPolyester-amide-imide (Polyamide-imide)
MW 36-Aor 220°CPolyester (Polyamide-imide)
MW 37or 220°CPolyester (Polyamide-imide)
MW 38or 220°CPolyester (Polyamide-imide)
MW 73or 200°CPolyester-amide-imide (Polyamide-imide)
MW 73-Aor 220°CPolyester-amide-imide (Polyamide-imide)
MW 74or 200°CPolyester-amide-imide
MW 74-Aor 220°CPolyester-amide-imide
Ground and Interwinding Insulations
Designationmils(mm)comments
CELANESE INTERNATIONAL CORP [E41938] - Recognized Component
Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)15 (0.38)
DuPont Specialty Products USA LLC [E39505] - Recognized Component
Kapton® 100H, 100HN, 100HN-S, 100H-ZT, 100HN-ZT, 100FPC-ZT, 100TAB-ZT, 100PST, 100HA, 100TN, 100V, 100VN, 100FPC, 100FPC-A, 100HPP-ST1 (0.03)
DuPont Specialty Products USA, LLC [E34739] - Recognized Component
Nomex® 4104 (0.1)
Nomex® 4119 (0.23)
Nomex® 4144 (0.1)
Nomex® 416, 416 LAM4 (0.1)
Nomex® 418, 818, 864LAM4 (0.1)
Nomex® 464, 464 LAM4 (0.1)
Nomex® 992, 992PSB8 (0.2)
Nomex® 993, 993PSB7 (0.18)
Nomex® 994, 994PSB7 (0.18)
E. I. Dupont de Nemours & Co.
Kapton HN1 (0.03)
Nomex® E56A6 (0.15)
Fu Wei Insulation Technology Co. Ltd.
AH4-XWhere A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AHA2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AHA-P2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AM4-XWhere A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AMA2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AMA-FR2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AMA-P2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AMAMA1.5-X-1.5-X-1.5Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AP4-XWhere A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
APA-FR2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
APA-P2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
APA-PEN2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
APA-PET2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
NH4-Xwhere N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NHN2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NHN-P2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NM4-Xwhere N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NMN2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NMN-FR2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NMN-P2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NMNMN1.5-X-1.5-X-1.5where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NPN-PEN2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
NPN-PET2-X-2where N is NOMEX paper grade 410, 464 by DuPont Specialty Products USA, LLC [E34739] at 0.10 mm minimum total thickness
X-Fiper New Material Co., Ltd
AHA2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
AMA2-X-2Where A is aramid paper grade X630 by X-FIPER NEW MATERIAL CO., LTD. (E320646) at 0.10 mm minimum total thickness
X-FIPER New Material Co., Ltd. [E320646] - Recognized Component
X-Fiper 3164 (0.1)
X-Fiper AD304 (0.1)
X-Fiper AR304 (0.1)
X-Fiper N-7564 (0.1)
X-Fiper X6104 (0.1)
X-Fiper X6124 (0.1)
X-Fiper X6304 (0.1)
X-Fiper X630H4 (0.1)
Lead Wires
lead wires are optional for this system
TempInsulation
150°CXLPE - crosslinked polyethylene +
200°CSR - silicone rubber(with or without braid)
200°CPTFE - polytetrafluoroethylene
200°CFEP - fluorinated ethylene propylene
+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.
Minor Sheet Materials
(layer, outer, wrap etc.) minor sheet is optional for this system
Designationcomments
BAOYING COUNTY JINGGONG INSULATION MATERIAL CO LTD [E330980] - employing Recognized materials
Jinggong-1
Fu Wei Insulation Technology Co., Ltd
AH
AHA
AM
AMA
AMA-P
Aramid paper-FW610
Aramid paper-FW616
Aramid paper-FW664
DH
DHD
DHD-P
DM-H
DMD
DMD-H
DMD-P
GFT
GHG
GHG-P
GM
GMG
GMG-P
HB
PI
SH
SHS
SHS-P
JIANGSU YUXING FILM TECHNOLOGY CO LTD [E212271] - employing Recognized materials
6023
Mylar Specialty Films [E93687] - employing Recognized materials
MYLAR Mylar A, AP, EL21, MO21
X-FIPER New Material Co., Ltd. [E320646] - employing Recognized materials
X-Fiper X611
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material
Tapes
tapes are optional for this system
Designationcomments
3M (Minnesota Mining & Mfg Co)
1554
3M COMPANY [E17385] - Listed or Recognized Component
1205
1318-1 (a)
1350F-1 (b)
27 (a)
60
63
69 (a), 9 (a)
79
79-FR
92
Fu Wei Insulation Technology Co., Ltd.
ACTacrylic adhesive, acetate cloth
GCTsilicone adhesive, glass cloth
M101acrylic adhesive, polyester film
M102silicone adhesive, polyester film PET
N501thermosetting silicone adhesive, NOMEX paper
P201silicone adhesive, polyimide film
P701acrylic adhesive, Non-woven fabric reinforced polyester film
P801thermosetting rubber adhesive, polyester film and glass fiber
X401acrylic adhesive, X-fiber paper
X402thermosetting silicone adhesive, X-fiber paper
JINGJIANG JINGYI ADHESIVE PRODUCT CO LTD [E246950] - Listed or Recognized Component
J16
J18
JY25-A (b)
WF310 (a)
Nitto Inc [E20392] - Listed or Recognized Component
P-21, P-21 WHT
P-210
P-212 WHT
P-212HD WHT
P-213 WHT
P-214
P-221
P-222
P-223 (P-223 PL)
P-223 AMB
P-224 AMB (formerly P-224)
P-224L AMB
P-225
P-226
SHEN ZHEN XINHUAHUI ELECTRONIC MATERIALS CO LTD [E328315] - Listed or Recognized Component
HKT
HMT
HMT803
HMT804
HWT
ZHEJIANG QINGLONG ADHESIVE TAPE CO LTD [E257132] - Listed or Recognized Component
J-236
Core tubes and Bobbins
(for mechanical support only) cores are optional for this system
Designationcomments
CELANESE INTERNATIONAL CORP [E41938] - employing Recognized materials
Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)
Zytel 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1), E101(r9)(f1), E101L(r9)(f1)
Zytel 70G33L(+)
Zytel FR50(+)(f1)
SUMITOMO BAKELITE CO LTD [E41429] - employing Recognized materials
SUMIKON PM-9630
SUMIKON PM-9820, PM-9825
Spacer and Wedges
spacer and wedges are optional for this system
Designationcomments
Fu Wei Insulation Technology Co., Ltd.
3240
BMC
DMC
Epoxy Tube
FR4
FR5
FRP
G10
G11
GPO-3
Kraft Paper
PB Board
SMC
Xiamen HongCheng Composite Materials Co Ltd [E344098] - employing Recognized materials
HC-GPO3
HC-SMC
HCT-GPO3
any material described in this table with no thickness requirement may be used as a spacer or a wedge
Tubing and Sleeving
tubing and sleeving are optional for this system
Designationcomments
DONGGUAN LING FREE HARDWARE PLASTICS PRODUCT CO LTD [E352366] - Recognized Component
LFSET-003
LFST-001
LFST-002
LING FREE PTFE TUBE
DONGGUAN LING FREE HARDWARE PLASTICS PRODUCT CO LTD [E520027] - Recognized Component
LFGS-001
Fu Wei Insulation Technology Co., Ltd.
AMATAMA tube
ARPTaramid paper tube
DMDTDMD tube
FSGSilicone coated fiberglass sleeving
HSTFlexible Heat-Shrinkable Modified Fluoropolymer tubing
PETTPET tube
PITPI tube
TTPolytetrafluoroethylene (PTFE) not-heat-shrinkable tubing
SHENZHEN WOER HEAT-SHRINKABLE MATERIAL CO LTD [E203950] - Recognized Component
RSFR-H
SHENZHEN WOER HEAT-SHRINKABLE MATERIAL CO LTD [E508078] - Recognized Component
SRG-N-70
Tie Cords
tie cords are optional for this system
Designationcomments
Fu Wei Insulation Technology Co., Ltd.
ARTAramid woven tape or cord
CFTCotton fiber woven tape
GFTNon-alkali fiberglass tape or cord
PFTPolyester fiber woven tape or cord
PGTPolyester and fiberglass woven tape or cord
PPSTPPS woven tape or cord
UWTUnidirectional Weftless Tape
Taizhou Chaoyong Line Belt Co., Ltd
CYD/180
CYX/180
Varnishes
Designationcomments
ELANTAS ZHUHAI CO LTD [E314793] - Recognized Component
50 (e), 50S (e), 50SM (e), 50VT (e), 50VTC (e), 5180 (e), 5183 (e), 5183SW, ELAN-Dur 822A01, CORONA-Protect 828A01
Guangzhou Faith Synthetic Materials Co Ltd [E491168] - Recognized Component
FS750(n)
Qingyuan Better New Materials Co Ltd [E230067] - Recognized Component
BETTER 116 (n)
SUZHOU TAIHU ELECTRIC ADVANCED MATERIAL CO LTD [E228349] - Recognized Component
ET-90(a)
Miscellaneous Minor Insulations
miscellaneous minor insulations are optional for this system
Designationcomments
ELANTAS ZHUHAI CO LTD [E333984] - employing Recognized materials
ELANZ 5282
GUANGZHOU BETTER NEW MATERIALS CO LTD
Better 116P
LI YANG CITY HONG DA RUBBER INDUSTRY CO., LTD
706Silicon Resin
Liuyang Panshi Chemical Plant
302Super Glue
QINGYUAN BETTER NEW MATERIALS CO LTD
BETTER 1356
UZAN New Material (SHANGHAI) CO., LTD
UZAN EP 6786-3D
UZAN EP 6882G
UZAN EP 9210S
ZHAOSHUN TECHNOLOGY(GUANGDONG) CO.,LTD [E329120] - employing Recognized materials
ZS-GF, ZS-GF-5299D, ZS-GF-5299E, ZS-GF-5299S, ZS-GF-5299L, ZS-GF-5299B, ZS-GF-5299BS, ZS-GF-5299G, ZS-GF-5299Z, ZS-GF-5299W, ZS-GF-5299XX, ZS-GF-D906XX, ZS-GF-G11XX, ZS-GF-G15XX, ZS-GF-G20XX, ZS-GF-G30XX *** materials are no longer Recognized ***

© 2025 UL LLC