UL Certification: MH10170 - Marking and Labeling System Materials

iq.ul.com

Marking and Labeling System Materials		MH10170
Guide Information
FLEXCON CO INC
FLEXCON CO INC
FLEXmount FATT 25 S, FLEXmount TT ($$$) L-606
Pressure-sensitive laminating adhesives

Face Stock	Face Stock Thk mm	Application Surface	Max Temp (°C)	Min Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Polycarbonate	0.127 - 0.508	Epoxy	100	-40	Yes	No	-
	0.127 - 0.508	Galvanized steel	100	-40	Yes	No	-
	0.127 - 0.508	Polycarbonate	100	-40	Yes	No	-
	0.127 - 0.508	Porcelain	100	-40	Yes	No	-
	0.076 - 0.381	Acrylonitrile butadiene styrene	80	-40	Yes	Yes	D, O, F2, G, K
	0.076 - 0.381	Aluminum	80	-40	Yes	Yes	D, O, F2, G, K
	0.076 - 0.381	Epoxy powder paint	80	-	Yes	No	D, O
	0.381	Epoxy powder paint	80	-23	Yes	Yes	D, O, F2, G, K
	0.127 - 0.508	Nylon - Polyamide	80	-40	Yes	No	-
	0.381	Polyester powder paint	80	-23	Yes	Yes	D, O, F2, G, K
	0.076 - 0.381	Polyester powder paint	80	-	Yes	No	D, O
	0.127 - 0.508	Polyethylene	80	-	Yes	No	-
	0.127 - 0.508	Polyethylene terephthalate	80	-40	Yes	No	-
	0.127 - 0.508	Polyphenylene oxide/ether	80	-40	Yes	No	-
	0.127 - 0.508	Polyurethane paint	80	-40	Yes	No	-
	0.076 - 0.381	Stainless steel	80	-40	Yes	Yes	D, O, F2, G, K
	0.127 - 0.508	Polypropylene	40	-	Yes	No	-
Polyester	0.025 - 0.051	Acrylic paint	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Alkyd paint	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Aluminum	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Epoxy paint	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Epoxy powder paint	150	-40	Yes	Yes	D, O, G
	0.025 - 0.051	Galvanized steel	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Polyester paint	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Polyester powder paint	150	-40	Yes	Yes	D, O, G
	0.025 - 0.051	Polyurethane powder paint	150	-40	Yes	Yes	D, O, G
	0.025 - 0.051	Porcelain	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Stainless steel	150	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Melamine	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Nylon - Polyamide	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Phenolic - Phenol Formaldehyde	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Polycarbonate	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Polyethylene	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Polyvinyl chloride	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Unsaturated polyester - thermoset	100	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Acrylonitrile butadiene styrene	80	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	EPDM rubber	80	-	Yes	No	-
	0.025 - 0.051	Polybutylene terephthalate	80	-40	Yes	Yes	D, O, F2, G, K
	0.025 - 0.051	Polypropylene	80	-40	Yes	No	D, O, F2, G, K
	0.025 - 0.051	Polystyrene	80	-40	Yes	Yes	D, O, F2, K

Canadian Application Face Stock	Face Stock Thk mm(in)	Canadian Application Surface	Max Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Polycarbonate	0.127 - 0.508	Plastic Group III	100	Yes	No	-
	0.127 - 0.508	Plastic Group VIII	100	Yes	No	-
	1.127 - 0.508	Porcelain	100	Yes	Yes	-
	0.127 - 0.508	Metals	80	Yes	No	-
	0.127 - 0.508	Plastic Group II	80	Yes	No	-
	0.127 - 0.508	Plastic Group V	80	Yes	No	-
	0.127 - 0.508	Plastic Group VI	80	Yes	No	-
	0.127 - 0.508	Powder coated metal A	80	Yes	Yes	-
	0.127 - 0.508	Powder coated metal C	80	Yes	Yes	-
Polyester	0.025 - 0.051	Metals	150	Yes	Yes	-
	0.025 - 0.051	Plastic Group I	100	Yes	Yes	-
	0.025 - 0.051	Plastic Group III	80	Yes	Yes	-
	0.025 - 0.051	Plastic Group V	80	Yes	Yes	-
	0.025 - 0.051	Plastic Group VI	80	Yes	Yes	-
	0.025 - 0.051	Plastic Group VII	80	Yes	Yes	-
	0.025 - 0.051	Plastic Group VIII	80	Yes	Yes	-

($$$) -	Replaced by 100-400-----indicating the adhesive thickness.
NOTE -	(1) The following alternate nomenclature may be used: "BBS" or "BB Stainless", "C" or "Clear", "CM" or "Clear Matte", "FC" or "Frosty Clear", "G" or "Gold", "RBBS" or "RBB Stainless", "S" or "Silver", "SM" or "Silver Matte", "THRMFLM" or "THERMLfilm", "TMP" or "TMPRK" or "TAMPERmark", "W" or "White". (2) Additional characters may be added to the end of the label designation indicating the type of release liner used unless a specific release liner is indicated. (3) Model designations may or may not include hyphens, apostrophes, single quotes, or dashes as part of the nomenclature. (4) In specific product designations the symbol---X is replaced by a word or characters which represent a specific color. And the symbol--XX is replaced by a word or numerical characters which identify a holographic pattern or image.
D -	Occasional exposure to Detergents (see report).
F2 -	Occasional exposure to Fuel Oil No. 2.
G -	Occasional exposure to Gasoline splashing.
K -	Occasional exposure to Kerosene.
O -	Occasional exposure to Lubricating Oil.

Report Date:	2001-03-16	© 2026 UL Solutions
Last Revised:	2015-06-17