Printing Materials		MH16635
Guide Information
FLEXCON CO INC
1 FLEXCON INDUSTRIAL PARK, SPENCER MA 01562-2643
unprinted stock dsg: DPM-S, DPM-SS
Pressure-sensitive systems

Suitable for additional printing with one or more of the following inks (in the black color unless otherwise indicated):
Additional Printing Note: Additional Printing inks are only suitable for indoor and outdoor use, unless otherwise specified
Hot stamp foil
API Foils	PMF MATTE PIGMENT FOIL (All, Suitable for O,G)
Inkjet cartridge with EFI Jetrion printers
EFI Jetrion	Jetrion 4000 UV (All, Suitable for O,G)

Application Surface	Max Temp (°C)	Min Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Acrylic paint	150	-40	Yes	Yes	O,G
Alkyd paint	150	-40	Yes	Yes	O,G
Aluminum	150	-40	Yes	Yes	O,G
Epoxy paint	150	-40	Yes	Yes	-
Epoxy/Urethane powder paint	150	-40	Yes	Yes	-
Galvanized steel	150	-40	Yes	Yes	-
Glass	150	-40	Yes	Yes	-
Polyester paint	150	-40	Yes	Yes	O,G
Polyester powder paint	150	-40	Yes	Yes	-
Porcelain	150	-40	Yes	Yes	-
Stainless steel	150	-40	Yes	Yes	-
Epoxy powder paint	125	-40	Yes	No	O
Phenolic - Phenol Formaldehyde	100	-40	Yes	Yes	-
Polycarbonate	100	-40	Yes	Yes	-
Acrylonitrile butadiene styrene	80	-40	Yes	Yes	O,G
Melamine	80	-40	Yes	Yes	-
Nylon - Polyamide	80	-40	Yes	Yes	O,G
Polybutylene terephthalate	80	-40	Yes	Yes	O
Polyethylene	80	-40	Yes	Yes	-
Polyphenylene oxide/ether	80	-40	Yes	Yes	-
Polypropylene	80	-	Yes	No	O,G
Polystyrene	80	-40	Yes	Yes	O
Polyvinyl chloride	80	-40	Yes	Yes	-
Unsaturated polyester - thermoset	80	-40	Yes	Yes	-

Suitable for additional printing with one or more of the following inks in Canadian applications (in the black color unless otherwise indicated):
Additional Printing Note: Additional Printing inks are only suitable for indoor and outdoor use, unless otherwise specified
Hot stamp foil
API Foils	PMF MATTE PIGMENT FOIL (All)
Inkjet cartridge with EFI Jetrion printers
EFI Jetrion	Jetrion 4000 UV (All)

Canadian Application Surface	Max Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Metals - bare, plated, painted or enameled steel or aluminum	150	Yes	Yes	S, SAE
Plastic Group I - phenolic, melamine, urea formaldehyde	100	Yes	Yes	-
Plastic Group II - polyphenylene oxide, polyphenylene sulphide	80	Yes	Yes	-
Plastic Group III - polycarbonate, acetate, acrylic	80	Yes	Yes	-
Plastic Group IV - polyethylene, polypropylene, polybutylene	80	Yes	Yes	-
Plastic Group V - polyamide, polyimide	80	Yes	Yes	-
Plastic Group VI - polystyrene, styrene acrylonitrile, acrylonitrile-butadiene-styrene	80	Yes	Yes	-
Plastic Group VII - polyvinyl chloride (rigid), plasticized polyvinyl chloride	80	Yes	Yes	-
Plastic Group VIII - Unsaturated (thermoset) polyester (fiberglass), epoxy plastic, polyethylene terephthalate, polybutylene terephthalate	80	Yes	Yes	-

Note -	(1) The following alternate nomenclature may be used: "BBS" or "BB Stainless", "C" or "Clear", "CM" or "Clear Matte", "G" or "Gold", "RBBS" or "RBB Stainless", "S" or "Silver", "SM" or "Silver Matte", "THRMFLM" or "THERMLfilm", "TMP" or "TMPRK" or "TAMPERmark", "W" or "White". (2) Additional characters may be added to the end of the label designation indicating the type of release liner used unless a specific release lener is indicated. (3) Model designations may or may not include hyphens, apostrophes, single quotes, or dashes as part of the nomenclature.
G -	Occasional exposure to Gasoline splashing.
O -	Occasional exposure to Lubricating Oil.
S -	Stoddard solvent.
SAE -	SAE 20W20 non-detergent oil

Report Date:	2011-12-23	© 2026 UL Solutions
Last Revised:	2018-10-03