Component - PlasticsE121562
Guide Information
SABIC INNOVATIVE PLASTICS US L L C
AMERICAS - RESIN, 1 PLASTICS AVE, PITTSFIELD MA 01201-3662
1000(f2)(X), 1000F(X), 1000R(X), 1100(X), 1100F(X), PW1000(X)
Polyetherimide (PEI) "Ultem", furnished as granular material

Color
Min. Thk
(mm)
Flame
Class

HWI

HAI
RTI Elec
(°C)
RTI Imp
(°C)
RTI Str
(°C)
ALL0.40V-2--105105105
NC0.75-24170170170
(X)0.75V-024170170170
ALL1.5V-024170170170
3.0V-0, 5VA13170170170
Comparative Tracking Index (CTI):4Inclined Plane Tracking (IPT) kV:1
Dielectric Strength (kV/mm):32Volume Resistivity (10x ohm-cm):17
High-Voltage Arc Tracking Rate (HVTR):2Surface Resistivity (10x ohms/square):-
Dimensional Change (%):0High Volt, Low Current Arc Resis (D495):5
(X) - All colors except Natural.
(f2) - Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
NOTE - Material designation may be followed by a color nomenclature consisting of either an alpha/numeric or numeric/alpha combination.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:2011-12-27© 2026 UL Solutions
Last Revised:2025-11-04