iq.ul.com
CLICK TO CONTINUEView additional material information including performance and processing data The information presented on the UL Prospector datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Component - PlasticsE65069
Guide Information
3M Innovative Paper Technologies
1 PAPER TRAIL, TILTON NH 03276-5250
FRB-BK
Inorganic, cold-molded compounds, furnished as sheets or rolls

Color
Min. Thk
(mm)
Flame
Class

HWI

HAI
RTI
Elec
RTI
Imp
RTI
Str
BK0.10 - 0.24V-0, 5VA11140-130
Comparative Tracking Index (CTI):0Inclined Plane Tracking (IPT) kV:-
Dielectric Strength (kV/mm):15Volume Resistivity (10x ohm-cm):19
High-Voltage Arc Tracking Rate (HVTR):0Surface Resistivity (10x ohms/square):-
Dimensional Stability (%):-High Volt, Low Current Arc Resis (D495):4
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:2010-06-12© 2020 UL LLC
Last Revised:2013-01-16

IEC and ISO Test Methods
Test NameTest MethodUnitsThk (mm)Value
FlammabilityIEC 60695-11-10, IEC 60695-11-20Class (color)0.10 - 0.24V-0, 5VA (BK)
Glow-Wire Flammability (GWFI)IEC 60695-2-12°C0.10 - 0.24960
Glow-Wire Ignition (GWIT)IEC 60695-2-13°C0.10 - 0.24930
IEC Comparative Tracking IndexIEC 60112Volts (Max)--
IEC Ball PressureIEC 60695-10-2°C--
ISO Heat Deflection (1.80 MPa)ISO 75-2°C--
ISO Tensile StrengthISO 527-2MPa--
ISO Flexural StrengthISO 178MPa--
ISO Tensile ImpactISO 8256kJ/m2--
ISO Izod ImpactISO 180kJ/m2--
ISO Charpy ImpactISO 179-1kJ/m2--