Conditions of Use: | |
1. | Environmental Suitability: Wet, Damp or Dry Location. |
2. | A letter made from a structural panel shall have at least two points of support and shall have no point more than 10 in. from a point of support. |
3. | Any parts other than neon standoffs or small decorative parts secured to the panel must be secured by means of through bolts, nuts and washers. The minimum washer diameter is 7/16 in. |
4. | Available as unpainted aluminum or pre-painted aluminum. |
5. | Electrical spacing and bonding for grounding shall comply with the end product standard. |
6. | Has not been investigated for the securement of conduit, electrode housings or the like, suitability shall be determined in the end product. |
7. | May be used in decorative and sign body applications, shall not be used as the enclosure of bare live parts or wiring. These products are intended for use with Class 2 powered circuitry only¿. |
8. | Not suitable for use in component mounting and support applications. |
9. | Not suitable for use in terminating conduit. |
10. | Rain tightness shall be determined in the end product. |
11. | Rated 75°C, where consideration will need to be given to end product thermal spacing from heat producing components. |
12. | Structural panels may be employed as external decorative faces and are acceptable for support of complete electrical enclosures, plastic faces, and moldings that are reliably secured to the panel¿. |
13. | The structural panel may be used in decorative and sign body applications, and shall not be used as the enclosure of bare live parts or wiring. These products are intended for use with Class 2 powered circuitry only¿. |