Conditions of Use: | |
1. | Environmental Suitability: Wet, Damp or Dry Location. |
2. | Circuit Type: Class 2 |
3. | Input Ratings - Voltage: 100-240Vac; Frequency: 50/60Hz; Max Amps: 0.4A |
4. | Output Ratings - Voltage: 12Vdc; Amps: 2.5A; Max Watts: 30W |
5. | Maximum case temperature is 85°C. |
6. | Maximum ambient temperature permitted without additional testing is 40°C. |
7. | Humidity and Rain tests have been conducted for reference only. The need to repeat these tests shall be considered when been conducted for reference only. The need to repeat these tests shall be considered when |
8. | LED driver spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls, and minimum 2 inches spacing to top of enclosure. |
9. | LED Drivers shall be located not less than 1 inch (25.4mm) apart when arranged end-to-end, and not less than 4 inches (102mm) apart when arranged otherwise. |
10. | The Ta is also 70C for damp location. |
11. | This LED driver is of the constant voltage type that requires the proper number of LED modules and controllers that does not exceed the maximum output current. |
12. | This product has been evaluated using a resistive load resulting in a maximum input and output. |
13. | This product is intended to be connected to a maximum 20 A branch circuit. |
14. | This product is suitable for factory wiring only. |
15. | Only supply leads need to be in an electrical enclosure or raceway. |