Conditions of Use: | |
1. | Environmental Suitability: Wet, Damp or Dry Location. |
2. | Circuit Type: Isolated |
3. | Input Ratings - Voltage: 100-240Vac; Frequency: 50/60Hz; Max Amps: 1.83A |
4. | Output Ratings - Voltage: 12Vdc; Amps: 12.5A; Max Watts: 150W |
5. | Maximum case temperature is 75°C. |
6. | Maximum ambient temperature permitted without additional testing is 40°C. |
7. | LED driver spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls, and minimum 2 inches spacing to top of enclosure. |
8. | LED Drivers shall be located not less than 1 inch (25.4mm) apart when arranged end-to-end, and not less than 4 inches (102mm) apart when arranged otherwise. |
9. | The product is intended to be built-in, the suitability of enclosure, mounting, input / output connections shall be considered in the end product. |
10. | This LED driver is of the constant voltage type that requires the proper number of LED modules and controllers that does not exceed the maximum output current. |
11. | This product is intended to be connected to a maximum 20 A branch circuit. |
12. | This product is suitable for factory wiring only. |
13. | The Ta is also 50C for damp location. |