Marking and Labeling System Materials		MH10170
Guide Information
FLEXCON CO INC
FLEXCON CO INC
THERMLfilm NEXgen 20120
Pressure-sensitive unprinted label stocks

Application Surface	Max Temp (°C)	Min Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Acrylic paint	150	-40	Yes	Yes	G,O
Alkyd paint	150	-40	Yes	Yes	G,O,RT(1)
Aluminum	150	-40	Yes	Yes	C,DL,DD,G,O,RT(1)
Copper	150	-40	Yes	Yes	-
Galvanized steel	150	-40	Yes	Yes	G,O
Glass	150	-40	Yes	Yes	-
Polyester paint	150	-40	Yes	Yes	G,O
Polyethylene terephthalate	150	-40	Yes	Yes	-
Stainless steel	150	-40	Yes	Yes	-
Epoxy paint	125	-40	Yes	Yes	-
Epoxy powder paint	125	-40	Yes	Yes	C,G,O,RT(1)
Epoxy/Polyester powder paint	125	-40	Yes	Yes	O
Epoxy/Urethane powder paint	125	-40	Yes	Yes	-
Polyester powder paint	125	-40	Yes	Yes	C,G,O
Polyester/Polyurethane powder paint	125	-40	Yes	Yes	O
Polyurethane powder paint	125	-40	Yes	Yes	G,O
Porcelain	125	-40	Yes	Yes	-
Melamine	100	-40	Yes	Yes	-
Nylon - Polyamide	100	-40	Yes	Yes	C,F2,G,K,O,RT(1)
Phenolic - Phenol Formaldehyde	100	-40	Yes	Yes	-
Polybutylene terephthalate	100	-40	Yes	Yes	C,F2,K,O
Polycarbonate	100	-40	Yes	Yes	C,F2,K,O,RT(1)
Acrylonitrile butadiene styrene	80	-40	Yes	Yes	C,G,O,RT(1)
Polyethylene	80	-40	Yes	Yes	-
Polyphenylene oxide/ether	80	-40	Yes	Yes	-
Polypropylene	80	-	Yes	No	C,G,O,RT(1)
Polystyrene	80	-40	Yes	Yes	-
Polyvinyl chloride	80	-40	Yes	Yes	-
Unsaturated polyester - thermoset	80	-40	Yes	Yes	-

Canadian Application Surface	Max Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Metals	150	Yes	Yes	C,DL,DD,G,O
Powder coated metal A	150	Yes	Yes	G,O
Powder coated metal C	150	Yes	Yes	G,O
Powder coated metal D	150	Yes	Yes	G,O
Plastic Group I	100	Yes	Yes	-
Plastic Group II	80	Yes	Yes	-
Plastic Group III	80	Yes	Yes	C,F2,K,O
Plastic Group IV	80	Yes	Yes	C,G
Plastic Group V	80	Yes	Yes	C,F2,G,K,O
Plastic Group VI	80	Yes	Yes	C,G,O
Plastic Group VII	80	Yes	Yes	-
Plastic Group VIII	80	Yes	Yes	-
Polybutylene terephthalate	80	Yes	Yes	C,F2,K

NOTE -	(1) The following alternate nomenclature may be used: "BBS" or "BB Stainless", "C" or "Clear", "CM" or "Clear Matte", "FC" or "Frosty Clear", "G" or "Gold", "RBBS" or "RBB Stainless", "S" or "Silver", "SM" or "Silver Matte", "THRMFLM" or "THERMLfilm", "TMP" or "TMPRK" or "TAMPERmark", "W" or "White". (2) Additional characters may be added to the end of the label designation indicating the type of release liner used unless a specific release liner is indicated. (3) Model designations may or may not include hyphens, apostrophes, single quotes, or dashes as part of the nomenclature. (4) In specific product designations the symbol---X is replaced by a word or characters which represent a specific color. And the symbol--XX is replaced by a word or numerical characters which identify a holographic pattern or image.
C -	Occasional exposure to Cooking Oil (room temp).
DL -	Occasional exposure to Laundry Detergents.
DD -	Occasional exposure to Dishwashing Detergents.
F2 -	Occasional exposure to Fuel Oil No. 2.
G -	Occasional exposure to Gasoline splashing.
K -	Occasional exposure to Kerosene.
O -	Occasional exposure to Lubricating Oil.
RT(1) -	Complies with UL 514A, UL 60950-1, UL 60335-1, UL 60745-1, UL 60974-1, UL 61058-1 and IEC 60950-1 marking durability rub test requirements.

Report Date:	2013-09-20	© 2026 UL Solutions
Last Revised:	2017-08-16