iq.ul.com
Plastics for Additive ManufacturingE497657
Guide Information
HP Inc
1501 Page Mill Rd, Palo Alto CA 94304
HP 3D HR PA12(#)(R80)
Polyamide 12 (PA12), furnished as powder for use with Multi Jet Fusion Technologies
Flammability Properties
PropertyMethodColorMin. Thk(mm)Class
FlammabilityANSI/UL 94, IEC 60695-11-10, -20BK0.75HB75
1.5HB75
3.0HB40
Electrical Properties
PropertyMethodValue
Dielectric StrengthASTM D1494 KV/mm
Volume ResistivityASTM D25713 10x ohm-cm
Comparative Tracking IndexASTM D36380 PLC+
Electrical Ignition Properties
PropertyMethodColorMin. Thk(mm)Value
Glow-Wire Ignition (GWIT)IEC 60695-2-13BK0.75800°C
1.5725°C
3.0725°C
Glow-Wire Flammability (GWFI)IEC 60695-2-12BK0.75775°C
1.5700°C
3.0700°C
Thermal Properties
PropertyMethodMin. Thk(mm)Value
Relative Thermal Index - Electrical StrengthANSI/UL 746B0.7565°C
1.565°C
3.065°C
Relative Thermal Index - Mechanical ImpactANSI/UL 746B0.7565°C
1.565°C
3.065°C
Relative Thermal Index - Mechanical StrengthANSI/UL 746B0.7565°C
1.565°C
3.065°C
Process Category: Powder Bed FusionPrinting Process Designation Number:
Processing ParameterValue
Build PlaneVertical
Post Processing MethodBead blasting: Glass beads, 70-150 µm or Ceramics beads, 150-250 µm with 3-5 bars Air Pressure. For 5-10 sec each 100cm2 with 15 cm distance to part.
For use with Printer:HP Jet Fusion 3D 5200 Printer, HP Jet Fusion 3D 5210 Printer, HP Jet Fusion 3D 4200 Printer, HP Jet Fusion 3D 4210 Printer. (HP Printing and Computing Solutions S L U - E165854)
Printer Preset:Balanced
Limited properties and ratings assigned to samples produced by the Additive Manufacturing technique representing a specific set of printing parameters and build strategy. Other print parameters and build strategies may result in significantly different results.
+ PLC = Performance Level Category
# - For use with Fusing and Detailing agents HP 3D600, HP 3D700 and HP 3D710
(R80) - Material is approved for use with Reclaimed powder of 80%
IEC/ISO small-scale test data does not pertain to building materials, furnishings and related contents. IEC/ISO small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:2018-02-13© 2020 UL LLC
Last Revised:2020-08-18