UL Certification: E497657 - Plastics for Additive Manufacturing

iq.ul.com

Plastics for Additive Manufacturing		E497657
Guide Information	View Certificate of Compliance
HP Inc
1501 PAGE MILL RD, PALO ALTO CA 94304-1126
HP 3D HR PA12GB(#)(R70)
Process Category: Powder Bed Fusion - Multi-Jet Fusion (MJF) Polyamide 12 (PA12), furnished as powder for use with Multi Jet Fusion Technologies

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT) kV:	-
Dielectric Strength (kV/mm):	3.38	Volume Resistivity (10^x ohm-cm):	14
High-Voltage Arc Tracking Rate (HVTR):	-	Surface Resistivity (10^x ohms/square):	-
Dimensional Change (%):	-	High Volt, Low Current Arc Resis (D495):	-

Processing Parameters:		Printing Process Designation Number:
Build Plane:	Horizontal	Laser Power (Watts):	-
Layer Thickness (µm):	-	Scan Speed (m/s):	-
Hatch Spacing (mm):	-	Scan Strategy:	-
Post Processing Method:	Bead blasting: Glass beads, 70-150 µm or Ceramics beads, 150-250 µm with 3-5 bars Air Pressure. For 5-10 sec each 100cm2 with 15 cm distance to part.
For use with printer:	HP Jet Fusion 3D 5200 Printer, HP Jet Fusion 3D 5210 Printer, HP Jet Fusion 3D 4200 Printer, HP Jet Fusion 3D 4210 Printer. (HP Printing and Computing Solutions S L U - E165854) Printer Preset: Balanced
Limited properties and ratings assigned to samples produced by the Additive Manufacturing technique representing a specific set of printing parameters and build strategy. Other print parameters and build strategies may result in significantly different results.

# -	For use with Fusing and Detailing agents HP 3D600, HP 3D700 and HP 3D710
(R70) -	Material is approved for use with Reclaimed powder of 70%.
IEC/ISO small-scale test data does not pertain to building materials, furnishings and related contents. IEC/ISO small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date:	2018-03-30	© 2024 UL Solutions
Last Revised:	2022-10-31

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	0.75	HB, HB75 (BK)
			1.5	HB, HB75 (BK)
			3.0	HB, HB40 (BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	°C	0.75	700
			1.5	675
			3.0	650
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	°C	0.75	725
			1.5	675
			3.0	675
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC AC Dielectric Strength (AC DS)	IEC 60243-1	kV/mm	-	-
IEC DC Dielectric Strength (DC DS)	IEC 60243-2	kV/mm	-	-
IEC Volume Resistivity (VR)	IEC 62631-3-1	10^x ohm-m	-	-
IEC Surface Resistivity (SR)	IEC 62631-3-2	10^x ohms	-	-
IEC Inclined Plane Tracking (IPT)	IEC 60587	kV	-	-
IEC Ball Pressure	IEC 60695-10-2	°C	-	170
ISO Heat Deflection (1.80 MPa)	ISO 75-2	°C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m²	-	-
ISO Izod Impact	ISO 180	kJ/m²	-	-
ISO Charpy Impact	ISO 179-1	kJ/m²	-	-