Plastics for Additive Manufacturing		E513172
Guide Information	View Certificate of Compliance
ASPECT Inc.
3104-1-101, Higashi-Naganuma, Inagi Tokyo 206-0802 JP
ASPEX-PA2FR (R60)@
Process Category: Powder Bed Fusion Polyamide 12 (PA12), furnished as powder

Color	Min. Thk (mm)	Flame Class	HWI	HAI	RTI Elec	RTI Imp	RTI Str
NC	1.5	HB	-	-	65	65	65
	2.0	V-2	-	-	65	65	65
	3.0	V-0	-	-	65	65	65
	5.0	V-0	-	-	65	65	65

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT) kV:	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	-	Surface Resistivity (10x ohms/square):	-
Dimensional Change (%):	-	High Volt, Low Current Arc Resis (D495):	-

Processing Parameters:		Printing Process Designation Number: 1 2
Build Plane:	Horizontal & Vertical	Laser Power (Watts):	See footnote @
Layer Thickness (µm):	100	Scan Speed (m/s):	-
Hatch Spacing (mm):	0.14	Scan Strategy:	-
Post Processing Method:	Air Blowing
For use with printer:	RaFaEl II 300C-HT or AM-E3 300HT Printer Preset: PA2FR_UL
Limited properties and ratings assigned to samples produced by the Additive Manufacturing technique representing a specific set of printing parameters and build strategy. Other print parameters and build strategies may result in significantly different results.

(R60) -	Material is approved for use with Reclaimed Powder of 60 wt.% maximum
@ -	For "RaFaEl II 300C-HT" or "AM-E3 300HT" printers. Max Laser power 32W at thk 3.0mm and above. Max Laser power 24W at thk 2.0mm and below.
IEC/ISO small-scale test data does not pertain to building materials, furnishings and related contents. IEC/ISO small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date:	2020-02-27	© 2024 UL Solutions
Last Revised:	2023-11-16

 

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	1.5	HB, HB75 (NC)
			2.0	V-2 (NC)
			3.0	V-0 (NC)
			5.0	V-0 (NC)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	°C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	°C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC AC Dielectric Strength (AC DS)	IEC 60243-1	kV/mm	-	-
IEC DC Dielectric Strength (DC DS)	IEC 60243-2	kV/mm	-	-
IEC Volume Resistivity (VR)	IEC 62631-3-1	10x ohm-m	-	-
IEC Surface Resistivity (SR)	IEC 62631-3-2	10x ohms	-	-
IEC Inclined Plane Tracking (IPT)	IEC 60587	kV	-	-
IEC Ball Pressure	IEC 60695-10-2	°C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	°C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-1	kJ/m2	-	-